New Braunfels TX Heating & Air Conditioning Services

HVAC System Repairs: Corrected frequent short cycling by adjusting thermostat anticipator settings, replacing clogged filters, and verifying blower motor operation. These adjustments improved temperature regulation and reduced strain on the compressor.

Summertime Air Conditioning Tune-Up: Cleaned outdoor condenser fins to improve airflow, checked system refrigerant pressures, flushed the drain line, and tightened all electrical connections to ensure peak cooling efficiency during hot weather.

HVAC System Repairs: Replaced a failing start capacitor that was causing delayed compressor startups. After replacement, tested system amperage draw and confirmed consistent and reliable operation with smoother cycling.

AC cool check completed on one horizontal Carrier heat pump. Drain line was flushed and treated. Condenser coils were cleaned. Found all mechanical and electrical components within manufacturer specifications. No major issues were found. The system is cooling properly at time of departure.

Air Conditioning System Repairs: Replaced a malfunctioning defrost control board in the heat pump unit, correcting erratic defrost cycles that were impacting cooling and energy use. Verified system behavior post-repair for reliable seasonal operation.

Summertime Air Conditioning Tune-Up: Conducted a full summer prep service including cleaning condenser fins, checking refrigerant charge, testing system pressures, and tightening all electrical connections to prevent mid-season breakdowns.

Whole Home Generator Installation: Installed a standby whole-home generator with an automatic transfer switch, ensuring uninterrupted power to HVAC, lighting, and essential appliances during outages. Conducted a full systems test to confirm seamless operation.

HVAC System Repairs: Diagnosed startup failure caused by a faulty start capacitor. Replaced the capacitor and tested system operation to confirm smooth startup cycles and reliable functionality across all modes.

Air Conditioning Installation: Installed a new high-efficiency Lennox AC system, complete with properly sized duct connections and a digital thermostat upgrade. Ensured optimized airflow and cooling capacity tailored to the home's layout for maximum comfort and energy savings.

Performed diagnostic on the main system. I found the outdoor fan motor had failed. This was causing the compressor to shutoff on thermal lockout. I also found the outdoor starter was pitted at the contacts. I spoke with Mr. Driscoll and he chose to have the motor and starter replaced. I replaced both components and cycled power at the thermostat. I also washed both outdoor coils and secured the compressor wiring on both systems. Both systems are operational at this time.

Installed new TXV on the heat pump condenser. Installed new liquid line filter drier inside the condenser. Cleared primary drain with CO2 and primed trap with water. Pressure tested system with nitrogen and pulled vacuum. Weighed in factory charge of R-410A and added additional charge to reach subcooling per charging chart. Tested operation of system. Everything is working at completion of service.

Smart Thermostat Installation: Installed a smart thermostat, allowing for remote temperature control and energy-efficient scheduling. This upgrade enhanced system performance, reduced utility costs, and offered greater convenience for the homeowner.

Removed old supply plenums. Built and installed new supply plenums, sealed all connections with mastic and hard cast. Reinstalled all duct connections with new metal collars and sealed with mastic. Completed dryer vent cleaning. Climbed up on roof and cleaned damper and roof cap. Cleared drains on both systems. Everything is working at completion of service.

Upsized ducting into the bedrooms and upsized the buckets. Installed returns in both rooms with filters. Removed metal WYEs and made ducts into home runs. Installed new registers. Sealed all connections with mastic. Tested static. Everything is operating as it should at completion of service.

Performed A/C tune-up on a Rudd heat pump system and checked the electrical, mechanical and performance systems of the unit. Filter was replaced recently and is clean. Cleared, cleaned, flushed and treated the drain line. Cleaned the exterior of the air handler and washed the outdoor coil. I found that the indoor coil is dirty. The system is currently working but I did inform him that if the coil gets dirtier it will restrict airflow and freeze over. I presented the homeowner with repair options. No other issues were found. The system is operational at this time.

Air Conditioning System Tune-Up: I conducted a detailed air conditioning system tune-up to optimize performance. By cleaning coils, checking refrigerant levels, and performing system tests, I ensured efficient cooling and extended the unit’s lifespan.

Attic Insulation Installation: To improve energy efficiency, I installed high-quality attic insulation, preventing heat loss and helping to maintain comfortable temperatures year-round. This upgrade reduces energy consumption and enhances indoor comfort for the homeowner.

AC cool check completed on a horizontal Trane system. All mechanical and electrical within manufacturer specs. The system is cooling properly at this time.

AC cool check completed on a horizontal furnace system. No major issues were found. The system is cooling properly at this time.

Completed a two system heat check on two horizontal heat pump systems. Upstairs unit - No major issues found. Downstairs unit - I found that the emergency drain pan has rusted, and there is buildup on the blower wheel. Both systems are heating properly at time of departure.

Service diagnostic found that the capacitor on the condenser unit has failed. Options for repair were presented to the homeowner, and Matt chose to have the capacitor replaced. I replaced the capacitor and function tested the system. The system is now operational.

AC System Replacement Service: A client sought to replace their outdated American Standard AC unit with a more efficient cooling system. I recommended and installed a high-performance Rheem central AC system. This upgrade enhanced cooling efficiency, reduced energy consumption, and provided the homeowner with long-term cost savings.

Springtime HVAC Tune-Up: During a scheduled spring HVAC tune-up, I performed an in-depth maintenance service, which included cleaning the evaporator coil, straightening coil fins, clearing condensate drains, inspecting refrigerant lines for leaks, and securing all electrical connections. These preventive measures ensured the system's peak efficiency for the warm months ahead.

I arrived and ran the endoscope camera through the length of pipe to see where clog was. I noticed it was mainly at the flapper. I then went outside and cleaned it from the outside making sure to get the lint free from the hinges. I then ran the brush through the entire length of pipe and vacuumed it out. I also rinsed the condenser and gave it a wax treatment at no additional charge to the homeowner.

Furnace Repair Service: A residential client experienced issues with uneven heating in their home. After a thorough inspection, I balanced the gas pressure and adjusted the flame sensor, restoring consistent warmth to every room.