Get the Best HVAC Service
Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.
HVAC Replacement Service in Kyle, TX
Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?
If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.
When Should You Replace Your HVAC System?
- Your AC needs frequent, costly repairs.
- Your unit is over 10 years old and struggles to cool your home.
- Energy bills have steadily increased despite regular maintenance.
- Your home has uneven temperatures from room to room.
What Size AC Unit Do You Need?
The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.
Expert Air Conditioning Repair in Kyle, TX
If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:
- Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
- Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
- High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
- Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.
How Long Does AC Repair Take?
Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.
Heating and Cooling Service FAQs
If your air conditioner freezes, follow these steps to get your unit functioning again:
- Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
- Do not remove the ice by hand to avoid damaging the unit.
- After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly.
- Turn the AC back on to see if it operates without freezing over.
Homeowners can anticipate paying between $100 - $500 for air conditioner repairs.
A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.
The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.
If it's Garner, It's Guaranteed
We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.
Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.
Recent Jobs and Reviews in Kyle, TX
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.
Kyle, TX at a glance
Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX in March 2023.
The most recent job was on March 27, 2023.
Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.
Our Local Reviews by City
- Austin, TX (78)
- Buda, TX (331)
- Canyon Lake, TX (5)
- Creedmoor, TX (4)
- Dale, TX (1)
- Driftwood, TX (29)
- Dripping Springs, TX (26)
- Hays, TX (1)
- Kingsbury, TX (1)
- Kyle, TX (480)
- Lockhart, TX (15)
- Manchaca, TX (9)
- Martindale, TX (14)
- Maxwell, TX (3)
- Mountain City, TX (26)
- New Braunfels, TX (13)
- Niederwald, TX (15)
- San Marcos, TX (157)
- Seguin, TX (3)
- Uhland, TX (2)
- West Lake Hills, TX (1)
- Wimberley, TX (104)
- Woodcreek, TX (4)
Job Locations and Reviews
Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated drain line and washed outdoor condensing unit. No major issues were found. System is on. Thermostat was left on cool at 76 per customer request.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Duct work is dirty and in need of cleaning. Blower wheel is also dirty. Ductwork has several places where the sealing is no longer intact. Gas line for the furnace is run into the system with flex gas line. No safety switch is installed for the condensate drain system. There is also no heat shield installed for the furnace. Drain line was cleared and treated. Condenser coil cleaned.
Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated the drain line and washed the outdoor condenser coil. I found that the outdoor capacitor is below range. I showed the customer and presented options to repair. Customer chose to have the capacitor replaced at this time. I did a function check after installing the new capacitor and the system was on and set to cool at 76 degrees per customer request.
Performed repairs on system. Added new draft hood connector and adapter for flue pipe exhaust. Replaced indoor blower motor and verified system operation. Everything is working properly upon completion of repairs.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Contactor in the condenser unit is burnt and pitted. Condenser fan motor is showing signs of overheating. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned.
Performed semiannual maintenance on 2 cooling systems. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Outside refrigerant pressures are within range for both systems. Both drain lines cleared.
Performed semiannual air conditioning maintenance on one cooling system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Outdoor condenser refrigerant pressures are within range and condenser cleaned. Indoor system is operational and drain line cleared. Completed AC maintenance checklist, No major issues found and system running at time of departure.
Heating maintenance visit. Completed furnace maintenance checklist, Checked electrical, mechanical, safety, and performance of the system. Everything is operating within factory specifications. Closet vacuumed out and evaporator cleaned as well. No major issues were found.
Performed heating maintenance. Completed full furnace maintenance checklist, Checked electrical, mechanical, safety, and performance of the system. Condenser fan motor is showing signs of overheating. No other major issues were found. Drain line cleared and treated. Condenser coil clean. Options for repair were presented to customer and they chose to have the condenser fan motor replaced today. Repair was completed. System was function checked. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed semiannual cooling maintenance. Completed full air conditioning maintenance checklist, Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufactures specifications for operation. Refrigerant pressures within range and condenser cleaned. Indoor system drain was cleared, and filter changed. No major issues were found. Thanked customer for using our AC maintenance services.
Replaced supply plenums and dampers. Sealed with mastic airlock. Installed Stage 5 Breathe Easy Package. Added Aprilaire filtration and sealed it with mastic airlock. Ran a 9” barometric bypass from supply to return plenum.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line was cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed service diagnostic. Diagnostic found that the primary condensate drain line is clogged. Water has backed up into the secondary drain line and tripped the safety switch. Options for repair were presented to customer and they chose to have the drain cleared today. Drain line was cleared, flow tested with water and treated. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed service diagnostic. Diagnostic found that the contactor in the condenser unit had locked up in the closed position. The system was constantly trying to run and causing the evaporator coil to freeze up. Capacitor on the condenser unit is also below value. Mold/mildew was found inside the air handler. Options for repair were presented to the customer and they chose to have the contactor and capacitor replaced. Repairs were completed. System was function checked. Electrical disconnect confirmed in and on. System was running at the time of departure.