Get the Best HVAC Service
Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.
HVAC Replacement Service in Kyle, TX
Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?
If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.
When Should You Replace Your HVAC System?
- Your AC needs frequent, costly repairs.
- Your unit is over 10 years old and struggles to cool your home.
- Energy bills have steadily increased despite regular maintenance.
- Your home has uneven temperatures from room to room.
What Size AC Unit Do You Need?
The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.
Expert Air Conditioning Repair in Kyle, TX
If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:
- Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
- Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
- High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
- Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.
How Long Does AC Repair Take?
Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.
Heating and Cooling Service FAQs
If your air conditioner freezes, follow these steps to get your unit functioning again:
- Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
- Do not remove the ice by hand to avoid damaging the unit.
- After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly.
- Turn the AC back on to see if it operates without freezing over.
Homeowners can anticipate paying between $100 - $500 for air conditioner repairs.
A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.
The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.
If it's Garner, It's Guaranteed
We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.
Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.
Recent Jobs and Reviews in Kyle, TX
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.
Kyle, TX at a glance
Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX between January 2023 and February 2023.
The most recent job was on February 22, 2023.
Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.
Our Local Reviews by City
- Austin, TX (78)
- Buda, TX (331)
- Canyon Lake, TX (5)
- Creedmoor, TX (4)
- Dale, TX (1)
- Driftwood, TX (29)
- Dripping Springs, TX (26)
- Hays, TX (1)
- Kingsbury, TX (1)
- Kyle, TX (480)
- Lockhart, TX (15)
- Manchaca, TX (9)
- Martindale, TX (14)
- Maxwell, TX (3)
- Mountain City, TX (26)
- New Braunfels, TX (13)
- Niederwald, TX (15)
- San Marcos, TX (157)
- Seguin, TX (3)
- Uhland, TX (2)
- West Lake Hills, TX (1)
- Wimberley, TX (104)
- Woodcreek, TX (4)
Job Locations and Reviews
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Condenser fan motor is leaking grease. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned. Options for repair were presented to customer and they chose to have the fan motor replaced today. Repair was completed. System was function checked. System was running at the time of departure.
Performed semiannual furnace maintenance on one gas heating furnace. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Surge protection devices are green lit and operational. Heating maintenance completed.
Performed semiannual maintenance on one gas furnace heating system. Inspected all Performance, Mechanical and Safety Systems. Did find the furnace to be under fired on arrival. Used combustion analysis to adjust fuel pressure. Verified system operation. Also noted the outdoor condenser exhaust motor to have high amp draw and showing signs of overheating along with the indoor return air sizing to be smaller than designed for the current system installed. After discussing with the homeowners, we have decided to move forward with changing out the outdoor exhaust motor, increasing return air and renewing the maintenance agreement. I also mentioned the advantages of surge protection, but we have decided to hold off on that at this time. Will revisit the installation of surge protection during the Spring maintenance visit. Completed repairs and tested all operations. Installed new 12x12x1 return air filter grille. Grille did not include a filter, went and got her one and dropped it off
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System was running at the time of departure. Presented options for system enhancements and the customer would like the estimates emailed over.
Performed heating maintenance. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. System was running at the time of departure.
Performed furnace maintenance. Checked electrical, mechanical, safety, and performance of the system. Air handler and blower wheel are dirty. Mold/mildew was found inside the air handler. Blower motor capacitor is below value and failing. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned. Options for repair were presented to the customer and they chose to have the capacitor replaced today for the blower motor. Other repairs were declined by the customer due to age of the system. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure. Please see attached checklist for full tune-up details.
Performed furnace maintenance. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. System was running at the time of departure.
Performed heating maintenance. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Surge protection and system sterilizers are operational. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. System was running at the time of departure.
Performed service diagnostic. Diagnostic found that the blower housing was squeaking due to lose mounting screws. The mounting screw were tightened, and the noise went away. Customer signed up for our maintenance plan. Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No other major issues were found. Drain line cleared and treated. Gas valve and manifold confirmed on. System was running at the time of departure.
Performed heat check. All safeties and wiring checked. Pressures and capacitor within range. Drain cleared and condenser washed off. Unit operating at time of departure.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Condenser fan motor is showing signs of overheating. No other major issues were found. Reme-Halo and UV sterilizers are operational. Drain line cleared and treated. Condenser coil cleaned. Options for repair were presented to the customer and they chose to have the condenser fan motor replaced and also to have surge protection installed. Repair was completed. System was function checked. System was running at the time of departure. Please see attached checklist for full tune-up details.
Performed heater maintenance on a Carrier gas system. Sequence of operations completed without any issues. Safeties tested, wiring tight, and drain line cleared. System running at time of departure.
Performed semiannual maintenance on one gas furnace system. Did find the furnace to be over fired and adjusted pressures to match furnace output. Once adjustment was made, I verified safety operations. Everything is working at this time.