Get the Best HVAC Service
Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.
HVAC Replacement Service in Kyle, TX
Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?
If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.
When Should You Replace Your HVAC System?
- Your AC needs frequent, costly repairs.
- Your unit is over 10 years old and struggles to cool your home.
- Energy bills have steadily increased despite regular maintenance.
- Your home has uneven temperatures from room to room.
What Size AC Unit Do You Need?
The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.
Expert Air Conditioning Repair in Kyle, TX
If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:
- Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
- Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
- High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
- Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.
How Long Does AC Repair Take?
Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.
Heating and Cooling Service FAQs
If your air conditioner freezes, follow these steps to get your unit functioning again:
- Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
- Do not remove the ice by hand to avoid damaging the unit.
- After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly.
- Turn the AC back on to see if it operates without freezing over.
Homeowners can anticipate paying between $100 - $500 for air conditioner repairs.
A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.
The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.
If it's Garner, It's Guaranteed
We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.
Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.
Recent Jobs and Reviews in Kyle, TX
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.
Kyle, TX at a glance
Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX in November 2022.
The most recent job was on November 21, 2022.
Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.
Our Local Reviews by City
- Austin, TX (78)
- Buda, TX (331)
- Canyon Lake, TX (5)
- Creedmoor, TX (4)
- Dale, TX (1)
- Driftwood, TX (29)
- Dripping Springs, TX (26)
- Hays, TX (1)
- Kingsbury, TX (1)
- Kyle, TX (480)
- Lockhart, TX (15)
- Manchaca, TX (9)
- Martindale, TX (14)
- Maxwell, TX (3)
- Mountain City, TX (26)
- New Braunfels, TX (13)
- Niederwald, TX (15)
- San Marcos, TX (157)
- Seguin, TX (3)
- Uhland, TX (2)
- West Lake Hills, TX (1)
- Wimberley, TX (104)
- Woodcreek, TX (4)
Job Locations and Reviews
Performed semiannual maintenance on two heat pump heating systems. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Did find, in the indoor air handler located in the closet of the office, that the disconnect would get above 500° due to the disconnect being undersized and not handling the current draw. Recommend installing a new disconnect box to ensure system does not burn through wires anymore. Installed new disconnect and tested all systems. Everything is working at this time.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line was cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. System was running at the time of departure.
Installed new X13 blower motor into the indoor air handler. Cycled both HEAT & COOL modes on system. Did verify motor turns on and off as it should. Also installed one power surge protection device inside the indoor air handler. Verified device was green lit therefore delivering active surge protection. Also labeled the outdoor breakers for air handler for ease of use for future visits.
Performed heat check on two systems. Checked electrical, mechanical, safety, and performance of the systems. No major issues were found. Drain line cleared and treated. Condenser coils cleaned. System surge protection operational. Electrical disconnects confirmed in and on. Gas valve and manifold confirmed on.
Performed semiannual maintenance on one gas furnace heating system. Inspected all Performance, Mechanical and Safety Systems. Found everything to be operating within manufacture’s specifications for operation.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Condenser fan motor was leaking grease and showed signs of overheating. System did not have a safety switch on either the condensate drain line or the secondary drain pan. No other major issues were found. Drain line was cleared and treated. Options for repair were presented to customer and they chose to have the fan motor replaced and a safety switch installed.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line was cleared and treated. Media filter was replaced with customer supplied filter. Condenser coil cleaned. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. System was running at the time of departure.
Performing routine maintenance on one comfort heating system. Testing all Performance, Mechanical and Safety Systems. Adjusting fuel pressure on both low and high stages and verifying operation of the heating system. Homeowners reported they thought one of the dampers was not working properly. Testing dampers and inspecting zone control module and verifying everything is operating to manufacturer’s specifications. Everything is working at this time.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Gas valve and manifold confirmed on. System was running at the time of departure.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. Thermostat was set to the customer’s desired temperature. System was running at the time of departure.
Performed semiannual maintenance on one gas furnace heating system. Inspected all Performance, Mechanical and Safety Systems. Ran a combustion analysis of system to test safety operation of unit. Adjusted fuel pressure to allow for maximum heating capacity. Filter does need to be changed but homeowner does not have any onsite. Verified everything is operating within the manufacture’s specifications for operation.
Performed semiannual maintenance on two heat pump heating systems. Inspected all Performance, Mechanical and Safety Systems. I did find the upstairs air handler coil to be matted over with insulation. Removed the insulation from the coil and inspected the return ducting to see if any ductwork was split open or improperly sealed. Did not see anything that would allow for insulation to be sucked in. Both coils are rusted and corroded. Ran my electronic leak detection system across coils and did not find my leaks present at this time. Both coils are also stained which can cause an airflow restriction in both the heating and cooling systems. Will check again during the cooling maintenance to verify condition of coils. Everything is working at this time. Please see attached checklists for full tune-up details.
Performed semiannual maintenance on one gas heating system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Filter that was installed appeared to be brand new. Went through each layer of filter media and did not see any dust or build up. Homeowner chose to leave that one inside and change filter out on next visit with an AprilAire 410.
Performing heat check on furnace as part of maintenance agreement. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. System was running at the time of departure.
Performing service diagnostic. Diagnostic found that the condenser fan motor had leaked lubricant and seized up. Options for repair were presented to customer and they chose to have the condenser fan motor replaced today. Condenser fan motor was replaced. Electrical disconnect confirmed in and on. System was running at the time of departure.