Get the Best HVAC Service
Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.
HVAC Replacement Service in Kyle, TX
Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?
If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.
When Should You Replace Your HVAC System?
- Your AC needs frequent, costly repairs.
- Your unit is over 10 years old and struggles to cool your home.
- Energy bills have steadily increased despite regular maintenance.
- Your home has uneven temperatures from room to room.
What Size AC Unit Do You Need?
The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.
Expert Air Conditioning Repair in Kyle, TX
If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:
- Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
- Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
- High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
- Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.
How Long Does AC Repair Take?
Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.
Heating and Cooling Service FAQs
If your air conditioner freezes, follow these steps to get your unit functioning again:
- Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
- Do not remove the ice by hand to avoid damaging the unit.
- After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly.
- Turn the AC back on to see if it operates without freezing over.
Homeowners can anticipate paying between $100 - $500 for air conditioner repairs.
A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.
The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.
If it's Garner, It's Guaranteed
We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.
Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.
Recent Jobs and Reviews in Kyle, TX
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.
Kyle, TX at a glance
Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX in October 2022.
The most recent job was on October 17, 2022.
Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.
Our Local Reviews by City
- Austin, TX (78)
- Buda, TX (331)
- Canyon Lake, TX (5)
- Creedmoor, TX (4)
- Dale, TX (1)
- Driftwood, TX (29)
- Dripping Springs, TX (26)
- Hays, TX (1)
- Kingsbury, TX (1)
- Kyle, TX (480)
- Lockhart, TX (15)
- Manchaca, TX (9)
- Martindale, TX (14)
- Maxwell, TX (3)
- Mountain City, TX (26)
- New Braunfels, TX (13)
- Niederwald, TX (15)
- San Marcos, TX (157)
- Seguin, TX (3)
- Uhland, TX (2)
- West Lake Hills, TX (1)
- Wimberley, TX (104)
- Woodcreek, TX (4)
Job Locations and Reviews
Removed old fuel line to furnace and installed new fuel line that meets all code and safety guidelines. Used electronic fuel leak detection and leak detection fluid to verify no leaks. Started gas furnace to verify system is operating. Everything is working at this time.
Performed semiannual maintenance on one gas heating system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within manufactures specifications for operation. Found everything to be working at this time.
Removed old duct work and triangle plenums. Sealed I-boxes to the sheetrock and added new elbows to the I-boxes. We converted the triangle plenums into wyes. Rehung and installed new flex ducts.
Performed heat check on the AC system. Verified performance and safety inspections. Please see attached checklist for full tune-up details.
Inspected all Performance, Mechanical and Safety Systems. Found the outdoor run capacitor to have failed on the compressor terminals. Replaced the outdoor capacitor and reset the HVAC system. Verified system startup and tested operations. Spoke with the client, and we agreed we need to get the system on our semiannual maintenance. Performed maintenance on one comfort cooling system. Tested all operations, cleaned and washed the outdoor condenser, and flushed and treated drain line. Did reseal the air handler insulation to the panel as I noted some of it starting to become loose. Everything is working at this time.
Performed semiannual maintenance on the AC system. Tested all Performance, Mechanical and Safety Systems. Verified system was operating within manufacture’s specifications for operation. Inspected the filter and found that it was not very dirty; homeowner would like to change the filter in the Spring.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Installed new supply plenum and flex duct through home. Sealed all pressure points with air lock and installed balancing dampers. Also sealed I-boxes to sheetrock. System operating at this time.
Performing HVAC service diagnostic. Diagnostic found that the condenser fan motor was overheating and leaking grease. Lack of lubricant was causing the motor to grind and squeal. Options for repair were presented to customer and they chose to have the motor replaced.
Performing heat maintenance check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. System is in excellent condition. Drain line cleared and treated. Gas valve and manifold confirmed on. System was running at the time of departure.
Inspecting the outdoor air conditioner unit and found the outdoor fan blade to have become disconnected from the hub of the shaft. Will pick one up at the supply house and return to install. Installed new fan blade, tightened to spec and reset the HVAC system. Tested operations and everything is working at this time.
Performing Fall maintenance heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Gas valve and manifold confirmed on. System was running at the time of departure.
Performing semiannual maintenance on one Comfort heating system. Inspected all Performance, Mechanical and Safety Systems. Adjusted gas pressure to allow for 100% cooling capacity of system. Tested and reset all furnace safeties and cycled system. Cleaned three return air filter grilles; homeowner did not have any additional filters on hand to change out the ones currently installed. The filters will need to be changed out soon as they have collected large amounts of dust which can lead to an airflow restriction to the system. Did notice return ductwork and supply ductwork have satellite plenums which is leading to unwanted strain on the mechanical system. This issue is also limiting airflow to be distributed to each supply grilles.
Performing heat inspection. Checked electrical, mechanical, safety, and performance of the system. Drain line was cleared and treated. Blower motor capacitor was below value. Furnace control board was malfunctioning and would constantly run the fan after a heat cycle. Options for repair were presented to the customer and they chose to have the control board and capacitor replaced today. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Condenser fan motor showed signs of overheating and was leaking grease. No other major issues were found. Drain line was cleared and treated. Options for repair were presented to customer and they chose to have the condenser fan motor replaced today. Repair completed. Electrical disconnect confirmed in and on. System was running at the time of departure. Please see attached checklist for full tune-up details.