Sign up today for our Gold Plan, now only $299/yr! (was $339)

Kyle TX Heating & Air Conditioning Services

Get the Best HVAC Service

Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.

Garner heating and air truck driving in kyle texas

HVAC Replacement Service in Kyle, TX

Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?

If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.

When Should You Replace Your HVAC System?

  • Your AC needs frequent, costly repairs.
  • Your unit is over 10 years old and struggles to cool your home.
  • Energy bills have steadily increased despite regular maintenance.
  • Your home has uneven temperatures from room to room.

What Size AC Unit Do You Need?

The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.

Expert Air Conditioning Repair in Kyle, TX

If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:

  • Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
  • Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
  • High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
  • Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.

How Long Does AC Repair Take?

Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.

Heating and Cooling Service FAQs

What should I do if my air conditioner freezes?

If your air conditioner freezes, follow these steps to get your unit functioning again:

  • Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
  • Do not remove the ice by hand to avoid damaging the unit.
  • After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly. 
  • Turn the AC back on to see if it operates without freezing over.
What is the average AC repair cost near Kyle TX?

Homeowners can anticipate paying between $100 - $500 for air conditioner repairs. 

Why is my air conditioner leaking water?

A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.

How much does a new HVAC system cost in Kyle TX?

The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.

If it's Garner, It's Guaranteed

We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.

Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.

Recent Jobs and Reviews in Kyle, TX

Rated 5.0 out of 5 stars based on 480 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.

Kyle, TX at a glance

Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX in April 2022.

The most recent job was on April 25, 2022.

Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.

Job Locations and Reviews

	Trip 1 - Performed the AC tune-up. While performing the inspection I did find deficiencies with the system. I presented repair options to the client, and they chose to have the secondary drain pan replaced as adding the Stage 4 Breathe Easy Package. I installed the Breathe Easy package today and we will return to replace the drain pan. 

Trip 2 - Installed the new secondary drain pan and everything is working at this time.
	Trip 1 - Performed the AC tune-up. While performing the inspection I did find deficiencies with the system. I presented repair options to the client, and they chose to have the secondary drain pan replaced as adding the Stage 4 Breathe Easy Package. I installed the Breathe Easy package today and we will return to replace the drain pan. 

Trip 2 - Installed the new secondary drain pan and everything is working at this time.
Max B.
Max B. Checked in
Trip 1 - Performed the AC tune-up. While performing the inspection I did find deficiencies with the system. I presented repair options to the client, and they chose to have the secondary drain pan replaced as adding the Stage 4 Breathe Easy Package. I installed the Breathe Easy package today and we will return to replace the drain pan. Trip 2 - Installed the new secondary drain pan and everything is working at this time.
Kyle, TX 78640
Jason D.
Jason D. Checked in
Trip 1 - I diagnosed that the start assist we installed yesterday failed to remove the start capacitor from the circuit. Because the start capacitor never dropped out of the circuit the run winding operated with all the power of the run capacitor and the start capacitor at the same time. This burned up the run winding. The compressor is now grounded and will need to be replaced. Due to the fact that we installed the start assist that burned up the winding Garner AC will cover the cost of replacing the compressor. Trip 2 - Replaced grounded compressor with new compressor. Removed the start assist from the condenser. Installed a new inline filter dryer in the attic. Pressure tested with dry nitrogen and pulled a deep vacuum. Charged system to factory specs. System is working properly upon departure. No charge.
Kyle, TX 78640
Ethan D.
Ethan D. Checked in
Installed Carrier Performance Series 3-ton gas furnace in closet. Rebuilt drain line with SS-2 safety switch and installed line filter dryer. Pressure tested system for extensive leak check and pulled deep vacuum. Weighed in factory charge and installed new Ecobee thermostat. Cleaned out return chase and sealed all pressure points with air lock. System operating at this time.
Kyle, TX 78640
Max B.
Max B. Checked in
Kyle, TX 78640
Max B.
Max B. Checked in
Kyle, TX 78640
Max B.
Max B. Checked in
Kyle, TX 78640
Ethan D.
Ethan D. Checked in
Installed Carrier Performance Series 3 ton gas furnace in closet. Rebuilt drain line with SS-2 safety switch and installed line filter drier. Pressure tested system for extensive leak check and pulled deep vacuum. Weighed in factory charge and installed new ecobee thermostat. Cleaned out return chase and sealed all pressure points with air lock.
Kyle, TX 78640
Performed the AC tune up. While performing the inspection I did find deficiencies with the system. I informed the client and they chose to go ahead and have the secondary pan replaced as well as installing the stage 4 breathe easy package. I installed the stage 4 today but we will need to make a second trip out here next week to replace the secondary pan.
Performed the AC tune up. While performing the inspection I did find deficiencies with the system. I informed the client and they chose to go ahead and have the secondary pan replaced as well as installing the stage 4 breathe easy package. I installed the stage 4 today but we will need to make a second trip out here next week to replace the secondary pan.
Max B.
Max B. Checked in
Performed the AC tune up. While performing the inspection I did find deficiencies with the system. I informed the client and they chose to go ahead and have the secondary pan replaced as well as installing the stage 4 breathe easy package. I installed the stage 4 today but we will need to make a second trip out here next week to replace the secondary pan.
Kyle, TX 78640
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Torque booster on condenser unit had failed. Start assist on the condenser unit had also failed and was leaking fluid. No other major issues where found. Options for repair were presented to customer and they chose to replace the start kit and the capacitor. Repair was completed. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Torque booster on condenser unit had failed. Start assist on the condenser unit had also failed and was leaking fluid. No other major issues where found. Options for repair were presented to customer and they chose to replace the start kit and the capacitor. Repair was completed. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Matt F.
Matt F. Checked in
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Torque booster on condenser unit had failed. Start assist on the condenser unit had also failed and was leaking fluid. No other major issues where found. Options for repair were presented to customer and they chose to replace the start kit and the capacitor. Repair was completed. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Kyle, TX 78640
Ryan P.
Ryan P. Checked in
Returned and reset the condenser. Attached the crossover ducts back to the supply plenum. Pulled vacuum and released the refrigerant. System is operational at this time.
Kyle, TX 78640
Ethan D.
Ethan D. Checked in
Installed Carrier Performance Series heat pump system in attic. Installed new Ecobee thermostat and drain pan. Built field transition and sealed all pressure points with air lock. Rebuilt drain line with SS-2 and SS-3 safety switches. Installed new line filter dryer and pressure tested system for extensive leak check. Pulled deep vacuum and weighed in R-410A charge.
Kyle, TX 78640
Performed AC cool check. Check of electrical, mechanical, safety, and performance of the system. Drain line cleared and treated. Condenser coil cleaned. Condenser fan motor showed signs of overheating. Hot surface igniter on furnace was cracked and had stress marks. Options for repair where presented to customer.
Performed AC cool check. Check of electrical, mechanical, safety, and performance of the system. Drain line cleared and treated. Condenser coil cleaned. Condenser fan motor showed signs of overheating. Hot surface igniter on furnace was cracked and had stress marks. Options for repair where presented to customer.
Matt F.
Matt F. Checked in
Performed AC cool check. Check of electrical, mechanical, safety, and performance of the system. Drain line cleared and treated. Condenser coil cleaned. Condenser fan motor showed signs of overheating. Hot surface igniter on furnace was cracked and had stress marks. Options for repair where presented to customer.
Kyle, TX 78640
Matt F.
Matt F. Checked in
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Kyle, TX 78640
Ethan D.
Ethan D. Checked in
Installed Carrier Performance Series gas system in attic. Installed new drain pan and return and supply plenums. Sealed all pressure points with air lock and hung new flex ductwork. Rebuilt drain line with SS-2 and SS-3 safety switches. Installed new line filter dryer and pressure tested system for extensive leak check. Pulled deep vacuum and weighed in factory charge. Installed new Ecobee thermostat and indoor and outdoor surge suppressors. Sealed buckets to sheetrock and installed balancing dampers. System operating at this time.
Kyle, TX 78640
Ryan P.
Ryan P. Checked in
Disconnect existing condenser and make ready for home to be moved. Once home is moved we will return and re-install the condenser. Returned and reset the condenser. Attached the crossover ducts back to the supply plenum. Pulled vacuum and released the refrigerant. System is operational at this time.
Kyle, TX 78640
Kyle . Buda . San Marcos . Wimberley . Driftwood . Martindale . Manchaca . Lockhart . New Braunfels
Schedule Now Text Us Now
Award Winning Service
  • Google Guaranteed
  • Carrier Authorized Dealer Logo
  • Service Round Table Member Logo
  • Best Or North Hays Logo
  • Nate Certified Technicians Logo
  • National Comfort Institute Inc Logo