Get the Best HVAC Service
Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.
HVAC Replacement Service in Kyle, TX
Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?
If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.
When Should You Replace Your HVAC System?
- Your AC needs frequent, costly repairs.
- Your unit is over 10 years old and struggles to cool your home.
- Energy bills have steadily increased despite regular maintenance.
- Your home has uneven temperatures from room to room.
What Size AC Unit Do You Need?
The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.
Expert Air Conditioning Repair in Kyle, TX
If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:
- Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
- Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
- High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
- Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.
How Long Does AC Repair Take?
Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.
Heating and Cooling Service FAQs
If your air conditioner freezes, follow these steps to get your unit functioning again:
- Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
- Do not remove the ice by hand to avoid damaging the unit.
- After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly.
- Turn the AC back on to see if it operates without freezing over.
Homeowners can anticipate paying between $100 - $500 for air conditioner repairs.
A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.
The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.
If it's Garner, It's Guaranteed
We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.
Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.
Recent Jobs and Reviews in Kyle, TX
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.
Kyle, TX at a glance
Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX on June 15, 2020.
Garner Heating & Air Conditioning Inc has completed 526 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.
Our Local Reviews by City
- Austin, TX (78)
- Buda, TX (331)
- Canyon Lake, TX (5)
- Creedmoor, TX (4)
- Dale, TX (1)
- Driftwood, TX (29)
- Dripping Springs, TX (26)
- Hays, TX (1)
- Kingsbury, TX (1)
- Kyle, TX (480)
- Lockhart, TX (15)
- Manchaca, TX (9)
- Martindale, TX (14)
- Maxwell, TX (3)
- Mountain City, TX (26)
- New Braunfels, TX (13)
- Niederwald, TX (15)
- San Marcos, TX (157)
- Seguin, TX (3)
- Uhland, TX (2)
- West Lake Hills, TX (1)
- Wimberley, TX (104)
- Woodcreek, TX (4)
Job Locations and Reviews
Found voltage enhancers below tolerance and replaced with one. Installed compressor starter/saver, performed electrical termination service and checked refrigerant levels. System working at completion of service
Found voltage enhancers below tolerance and replaced with one. Installed compressor starter/saver, performed electrical termination service and checked refrigerant levels. System working at completion of service
Performed 1 system cooling tune-up. Checked all mechanical, safeties and system performance. Homeowner concerned about upstairs cooling properly; sometimes it keeps up and sometimes it doesn’t. Valve was “hunting” initially on startup but was fine after 5 minutes. Checked sensing bulb and it was installed properly. Valve could be acting up and there may be debris in the system. System working at time of tune-up.
Performed 1 system cooling tune-up. Checked all mechanical, safeties and system performance. Homeowner concerned about upstairs cooling properly; sometimes it keeps up and sometimes it doesn’t. Valve was “hunting” initially on startup but was fine after 5 minutes. Checked sensing bulb and it was installed properly. Valve could be acting up and there may be debris in the system. System working at time of tune-up.
Performed 1 system cooling tune-up. Checked all mechanical, safeties and system performance. Homeowner concerned about upstairs cooling properly; sometimes it keeps up and sometimes it doesn’t. Valve was “hunting” initially on startup but was fine after 5 minutes. Checked sensing bulb and it was installed properly. Valve could be acting up and there may be debris in the system. System working at time of tune-up.
Performed 1 system cooling tune-up. Checked all mechanical, safeties and system performance. Homeowner concerned about upstairs cooling properly; sometimes it keeps up and sometimes it doesn’t. Valve was “hunting” initially on startup but was fine after 5 minutes. Checked sensing bulb and it was installed properly. Valve could be acting up and there may be debris in the system. System working at time of tune-up.
When I arrived the customer informed me that the out door system fan was not coming on and running. He turned it on for me everything came on and was working. I checked the amp draw on the motor and it was pulling 1.1 amps at this time. I checked the voltage enhancer and it was below value by 25%. I gave the customer his options on replacing motor as well as voltage enhancers and he chose just to have the voltage enhancers replaced at this time and see how it goes and if the motor fails he will call us back out to have it replaced that at that time. After replacing the voltage enhancers everything is coming on and running at this time.
Purged (2) drain lines, treated drains, added union for future access, installed ball valve to isolate the two systems and checked refrigerant levels. System in the break room was frozen over and will need to be thawed out. Removed two very dirty filters and this could have caused the system to freeze up. System in the teller area is working fine and indoor coil is clean. Please replace both of your filters and do not turn on the break room AC until 6/13/30. Filter size is 20x22x1.
Purged (2) drain lines, treated drains, added union for future access, installed ball valve to isolate the two systems and checked refrigerant levels. System in the break room was frozen over and will need to be thawed out. Removed two very dirty filters and this could have caused the system to freeze up. System in the teller area is working fine and indoor coil is clean. Please replace both of your filters and do not turn on the break room AC until 6/13/30. Filter size is 20x22x1.
Purged (2) drain lines, treated drains, added union for future access, installed ball valve to isolate the two systems and checked refrigerant levels. System in the break room was frozen over and will need to be thawed out. Removed two very dirty filters and this could have caused the system to freeze up. System in the teller area is working fine and indoor coil is clean. Please replace both of your filters and do not turn on the break room AC until 6/13/30. Filter size is 20x22x1.
Purged (2) drain lines, treated drains, added union for future access, installed ball valve to isolate the two systems and checked refrigerant levels. System in the break room was frozen over and will need to be thawed out. Removed two very dirty filters and this could have caused the system to freeze up. System in the teller area is working fine and indoor coil is clean. Please replace both of your filters and do not turn on the break room AC until 6/13/30. Filter size is 20x22x1.
Installed new carrier gas furnace in upstairs attic. Installed new line filter dryer and pressure tested system for extensive leak check. Added two new ecobee thermostats. Charged system to factory specs and changed out bedroom grills to 10x8. Rebuilt primary drain and added SS-1 and SS-3 float switches.
Performed maintenance on 2 Carrier package units. The filters and belt were replaced recently in RTU2. The filters were replaced today, and the belt needs to be replaced in RTU1. Since the store did not have any filters onsite, we provided them; see attached invoice. Also, there is an attached quote for replacing the belt and pulling and cleaning the dirty blower wheel. Both systems are cooling at this time.
Performed 1 system cooling tune-up. Checked all mechanical, safeties and system performance. Replaced depleted compressor starter. System working at completion of service.
Performed 1 system cooling tune-up. Checked all mechanical, safeties and system performance. Replaced depleted compressor starter. System working at completion of service.