New Braunfels TX Heating & Air Conditioning Services

Performed A/C tune-up on a Rudd heat pump system and checked the electrical, mechanical and performance systems of the unit. Filter was replaced recently and is clean. Cleared, cleaned, flushed and treated the drain line. Cleaned the exterior of the air handler and washed the outdoor coil. I found that the indoor coil is dirty. The system is currently working but I did inform him that if the coil gets dirtier it will restrict airflow and freeze over. I presented the homeowner with repair options. No other issues were found. The system is operational at this time.

Air Conditioning System Tune-Up: I conducted a detailed air conditioning system tune-up to optimize performance. By cleaning coils, checking refrigerant levels, and performing system tests, I ensured efficient cooling and extended the unit’s lifespan.

Attic Insulation Installation: To improve energy efficiency, I installed high-quality attic insulation, preventing heat loss and helping to maintain comfortable temperatures year-round. This upgrade reduces energy consumption and enhances indoor comfort for the homeowner.

AC cool check completed on a horizontal Trane system. All mechanical and electrical within manufacturer specs. The system is cooling properly at this time.

AC cool check completed on a horizontal furnace system. No major issues were found. The system is cooling properly at this time.

Completed a two system heat check on two horizontal heat pump systems. Upstairs unit - No major issues found. Downstairs unit - I found that the emergency drain pan has rusted, and there is buildup on the blower wheel. Both systems are heating properly at time of departure.

Service diagnostic found that the capacitor on the condenser unit has failed. Options for repair were presented to the homeowner, and Matt chose to have the capacitor replaced. I replaced the capacitor and function tested the system. The system is now operational.

AC System Replacement Service: A client sought to replace their outdated American Standard AC unit with a more efficient cooling system. I recommended and installed a high-performance Rheem central AC system. This upgrade enhanced cooling efficiency, reduced energy consumption, and provided the homeowner with long-term cost savings.

Springtime HVAC Tune-Up: During a scheduled spring HVAC tune-up, I performed an in-depth maintenance service, which included cleaning the evaporator coil, straightening coil fins, clearing condensate drains, inspecting refrigerant lines for leaks, and securing all electrical connections. These preventive measures ensured the system's peak efficiency for the warm months ahead.

I arrived and ran the endoscope camera through the length of pipe to see where clog was. I noticed it was mainly at the flapper. I then went outside and cleaned it from the outside making sure to get the lint free from the hinges. I then ran the brush through the entire length of pipe and vacuumed it out. I also rinsed the condenser and gave it a wax treatment at no additional charge to the homeowner.

Furnace Repair Service: A residential client experienced issues with uneven heating in their home. After a thorough inspection, I balanced the gas pressure and adjusted the flame sensor, restoring consistent warmth to every room.

Heating System Repairs: Arrived at a client's home to resolve heating inefficiencies. Identified and cleaned a clogged burner assembly, which significantly improved combustion and ensured steady, reliable warmth throughout the home.

Winter HVAC System Tune-Up: Performed a comprehensive winter HVAC maintenance service, focusing on optimizing the system for colder months. Inspected the heat exchanger for cracks, cleared and adjusted burner assemblies, tested safety controls, and tightened electrical connections. These preventative measures ensure safe, efficient, and consistent heating throughout the winter.

Heat check completed on a horizontal heat pump system. No major issues found.

Heat Pump Repair Service: A heat pump experiencing defrosting issues required immediate attention. We diagnosed a defective defrost sensor, replaced it with precision, and fine-tuned the system for optimal heating efficiency. The client now enjoys consistent warmth and was advised on routine maintenance to prevent future issues.

AC System Replacement: A homeowner struggling with an outdated cooling system opted for an upgrade. We installed a high-efficiency AC unit, rigorously tested its performance, and confirmed optimal operation. The result is a more comfortable home environment and lower energy bills.

Indoor Air Purification System Installation: Concerned about indoor air quality, a client requested a high-performance solution. We installed a cutting-edge duct air purifier directly into their HVAC system. Strategically integrated, the purifier effectively eliminates allergens and airborne contaminants, ensuring fresher, healthier indoor air.

Installed new Carrier system. Installed Ecobee thermostat. Installed plywood overlay. Installed new extended supply plenum. Sealed all connections with mastic air lock. Rebuilt and insulated the primary drain line. Installed SS2 safety float switch. Cleared and verified drain operation. Reinsulated suction line. Ran low voltage in 1/2-inch Seal-Tite. Replaced disconnect and whip. Ensured system specifications were at manufacturers standards.

HVAC Maintenance and Repair: A customer’s heating system failed to keep their home warm during a cold snap. Our technicians identified a blocked flue pipe, which was restricting airflow and causing the system to underperform. After clearing the blockage and conducting a full system inspection, the heating system resumed normal operation, efficiently heating the home.

Duct Air Purifier Installation Service: To address concerns about lingering odors and allergens, I installed a duct-mounted air purifier. The system now neutralizes particles such as dust, pollen, and pet dander, enhancing indoor air quality and providing a healthier space for the homeowner during autumn allergy season.

Heating tune-up completed on a horizontal gas system. The drain line was flushed and treated. The air filter was changed. All electrical examined. I did find that the inducer motor’s amp draws are slightly elevated and needs to be monitored. Static pressure within range, and heat rise also within range. No other major issues found.

Performed heating maintenance on a gas system. Checked all electrical, mechanical, safeties and performance of the system. Cleared the drain line and also cleaned the outside of the furnace system. No other major issues were found, and the system is operational at this time.

Heating System Repairs: A client reported heating issues, so I conducted a thorough inspection and cleaned the dirty burner assembly. This improved combustion efficiency, ensuring consistent and reliable warmth for the homeowner as colder weather set in.

On arrival the homeowner stated that her Reme Halo air purifier was not working, and she wanted to add an ionizer and UV lights. I installed our Stage 2 and Stage 3 Breathe easy packages. I also tested the Reme Halo and found it to be working. I informed the homeowner of this, and she asked me to unplug it for now just in case she decides to have it on later. After I completed the work, I checked the system and found the outdoor condenser fan motor has a hotspot. I informed the customer and presented options for repair,. No other major issues were found, and the system is operational at this time.

I installed the new blower wheel housing, motor and blower wheel. Checked operation of the system and found no other issues. Both zones are open, and filters were clean. The system is operational at this time.