HVAC Service In Buda, TX

AC Replacement Services: When faced with an outdated and inefficient AC unit, I recommended and executed a comprehensive AC replacement. We consulted with the client and selected the appropriate system for their needs. We arrived at the home and carefully installed the new system. The installation of a high-efficiency unit not only improved cooling capacity but also enhanced indoor air quality through advanced filtration and ventilation features.

HVAC Maintenance: During a routine HVAC maintenance visit, I meticulously inspected the system's components, cleaned the evaporator and condenser coils, and checked refrigerant levels. By ensuring the system's optimal performance, I contributed to energy efficiency and improved indoor air quality.

Installed new system and Ecobee Lite thermostat. Rebuilt and insulated condensate drain line. Added SS2 safety float switch. Installed new filter dryer, pressure tested with dry nitrogen and pulled a vacuum on the copper line set. Replaced the condenser pad and moved it away from the dryer vent. Replaced the disconnect and ran the low bottom in Seal-Tite. Built a transition to the existing supply plenum and sealed with mastic airlock. Put down a plywood overlay. Charged system to factory spec. System is working properly at time of departure.

Installed Carrier Ductless System. Pressure tested with nitrogen and pulled a vacuum on the flared line set. Verified system operation and verified drain operation. Everything is working at this time.

Upon arrival, the customer informed me that the AC had stopped cooling the night before. After checking over the mechanical and electrical components on the outside system I found that the condenser fan motor was overheating, and the capacitor has zero value on the fan side. Presented repair options and the homeowner chose to have both components replaced. They also chose to sign up for our Silver maintenance plan; we will complete that maintenance this Fall/Winter. Completed repairs and the system is now operational.

Performed AC cool check. Checked electrical, mechanical, safety and performance of the system. The clip that retains the screw for the evaporator door had fallen out and was allowing air to leak. The clip was replaced, and the door was secured to the air handler. The insulation around the suction line was worn and torn so we replaced that insulation. The condenser coil had leaves removed and was cleaned. The drain line was cleared and treated. No other major issues were found, and system was running at the time of departure.

Performed the AC tune-up. Cleared and treated drain line. Condenser coil clean. No major issues found.

Performed the AC tune-up. Cleared and treated drain line. Condenser coil clean. No major issues found.

Repaired the leak on the condenser. Replaced the inline filter dryer, pressure with dry nitrogen and pulled a vacuum on the copper lone set. Charged system to factory specs and checked over operation. Everything is working properly at this time.

Performed service diagnostic. Diagnostic found that the transformer in the air handler has failed. Options for repair were presented to the customer and they chose to have the transformer replaced today. The transformer was replaced, and the system was function checked. System was running at the time of departure.

Performed diagnostic. I found that the outdoor capacitor has failed. I presented my findings to the homeowner, and he chose to have it replaced at this time. I replaced the capacitor, and I also replaced a 20x20x1 air filter provided by the customer. The system is on and running at this time.

Upon arrival, the homeowner informed me that the indoor system was running, but the outdoor system was not. After checking over electrical and mechanical components, I found that the capacitor was below value. Presented repair options and the homeowner chose to have the capacitor replaced today. Repair completed and the system is now operational.

Installed new outdoor TXV and relocated filter dryer. Pressure tested the system and pulled a vacuum on the copper line set. Weighed in the factory refrigerant charge. Verified operation and charged system to manufacturers specifications. Cleared and verified drain operation.

Performed diagnostic. I found that the starter was stuck closed and passing a constant 240 volts to the compressor and fan motor. I also found that the indoor blower wheel is dirty. I presented repair options to the homeowner, and she chose to have the starter replaced today. She also chose to sign up for our Gold Maintenance plan. The first maintenance visit will be this Fall/Winter. Repair completed, system is operational and thermostat was set to 78 per customer request.

Installed Stage 3 Breathe Easy Package. Checked the operation of the system and it is working properly at this time.

On arrival, I found the indoor water safety switch tripped cutting off power to the system. I cleared the primary drain line out and flushed with a gallon of water. When I went to clean out the primary pan, I noticed water dripping from the drain plug area. I found that the yellow drain plug was missing, and condensation was leaking from that weep hole. I used silicone sealant to seal up the hole and reset the system. Tested all systems and everything is working at this time.

Performed service diagnostic on the system for the West side of the home. Diagnostic found that the capacitor on the condenser unit has failed. Condenser fan motor is also showing signs of overheating. Options for repair were presented to the customer and they chose to have the capacitor and condenser fan motor replaced today. They also chose to join our annual maintenance plan for all three systems. Capacitor and condenser fan motor were replaced. System was function checked and was running at the time of departure.

HVAC Maintenance: Responding to a client's request for seasonal maintenance, I arrived at their residence to ensure their heat pump system was ready for any changing weather. I inspected the outdoor and indoor units, cleaned the coils, checked refrigerant levels, and assessed the defrost cycle. Additionally, I verified the functionality of the reversing valve to ensure smooth switching between heating and cooling modes. By conducting this comprehensive maintenance, I ensured that the heat pump system would operate efficiently and provide optimal comfort throughout the seasons.

A/C Replacement Service: When a homeowner's old A/C system faced continuous breakdowns, we recommended a reliable solution. After a detailed assessment, we advised the installation of a new Trane central air conditioning unit, renowned for its performance and durability. On the installation day, our skilled team efficiently removed the old system and seamlessly integrated the new Trane unit. The upgraded A/C system now offers efficient cooling and enhanced comfort, providing the homeowner with a reliable solution for years to come.

Air Purification System Installation: Addressing the client's concerns about indoor air quality, we proposed the installation of an advanced air purification system in their home. After discussing their needs, we carefully selected a system that suited their space. On the designated day, our team arrived with the necessary equipment. With meticulous attention to detail, we integrated the air purification system seamlessly into their HVAC setup. By optimizing filtration and eliminating pollutants, the client now enjoys a healthier indoor environment with improved air quality, contributing to their overall well-being.