Kyle TX Heating & Air Conditioning Services

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Remy-Halo and UV protection is operational. Surge protection was also operational. No major issues were found. Drain line was cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed the AC tune-up. I did find a bad capacitor on the indoor blower motor. No other major issues found The homeowner chose to have the capacitor replaced today. Completed repair and the system is operational.

Performed the AC tune-up. No major issues found. System was working at completion of job.

Performed the AC tune-up. I did find lubricant leaking out of the outdoor fan motor. Also found that the safety float switch was failing. No other major issues found. Presented options for repair and the homeowner decided to have the fan motor and float switch replaced. Completed repairs and completed performance and safety testing. System is operational.

Performed the AC tune-up. I did find lubricant leaking out of the outdoor fan motor. Also found that the safety float switch was failing. No other major issues found. Presented options for repair and the homeowner decided to have the fan motor and float switch replaced. Completed repairs and completed performance and safety testing. System is operational.

Performed service diagnostic. Diagnostic found that the condensate drain line was clogged. Water had backed up and tripped the safety switch. Options for repair were presented to the customer and they chose to have the drain cleared today. Drain line was cleared and flow tested with water. Drain line was treated. System was function checked and was running at the time of departure.

Performed service diagnostic. Diagnostic found that the condensate drain line was clogged. Water had backed up and tripped the safety switch. Options for repair were presented to the customer and they chose to have the drain line cleared. Drain line was cleared and flow tested with water. Drain line was treated. System was running at the time of departure.

Found the suction line thermistor reading above actual temperature on the Carrier Heat Pump system. Thermistor was reading triple digits when the actual temperature was down in the 70° range. Recommended replacing the sensor and then testing system to ensure all functions are operating within manufacture’s specifications for operation. Spoke with homeowner, we have decided to move forward with replacement of the sensor and renewing our maintenance agreement. Installed new outdoor suction line sensor and completed the semiannual maintenance. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within manufacture’s specifications for operation.

Performed semiannual maintenance on one comfort cooling system. Inspected all Performance, Mechanical and Safety Systems. I found that the refrigerant levels are under the manufacture’s guidelines for operation. I used my electronic leak detector and leak checked the indoor coil. Did find a rupture in the coil and then used soap bubble detection solution to pinpoint the leak. Recommended replacing the indoor coil and recharging system back to factory specifications to ensure 100% cooling capacity of the system. Verified everything else was operating within manufacture’s specifications for operation. I also found that the Stage 4 Breathe Easy system has failed and will need to be replaced. Parts have been ordered and we will return to complete repairs once they have arrived at the shop. Replaced the indoor evaporator coil and the Stage 4 Breathe Easy system. Removed all old refrigerant and replaced the in-line filter dryer. Pressure tested the system with dry nitrogen and pulle

Performed service diagnostic. Diagnostic found that the condensate drain line was clogged. Water had back up and tripped the safety switch. Options for repair were presented to the customer and they chose to sign up for maintenance and we will be using the first visit today so we can get the drain cleared. Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Other than the clogged drain, no other major issues were found. Drain line was cleared and flow tested with water. Drain line was treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.

On arrival, I met with the homeowner, and he said he noticed that water kept backing up into the unit. I found the cap was taken off the clean out of the p-trap which was causing the issue of water backing into the air handler. I flushed and treated the primary drain line. Verified operation of system and everything is working at this time. Also informed homeowner that the fan mode should be set to auto, as this will help with high humidity issues inside the home.

Performed the AC tune-up. No major issues found. System was working at completion of job.

Performed an AC tune-up. I found that the capacitor was under value. No other major issues found I presented my findings to the homeowner and they chose to have the capacitor replaced today. Repair was completed and system is operational.

After the completed repairs yesterday, I noticed that the outdoor heat pump was making a relay clicking noise, however due to inclement weather at time, I was unable to further diagnose the issue. After inspecting the low voltage control system, I found that the low-pressure switch had failed in the open position. Verified the system had an equalized pressure of 240psi, and the switch remained in the open position. The LPS is a braze on style, where replacement of the switch would require removing all refrigerant from the system, removing the old pressure switch and brazing in a new one. Then we would need to pull a deep vac and recharge system with refrigerant. Removed all of the refrigerant from the system. Replaced the low-pressure switch. Pressure tested with dry nitrogen and pulled a deep vacuum on the line set. Charged with new refrigerant to factory specs. System is working properly at this time. Removed all of the refrigerant from the system. Replaced the low-pressure switc

Performed service diagnostic. Diagnostic found that the capacitor on the condenser unit has failed. Options for repair were presented to the customer and they chose to have the capacitor replaced today. Capacitor on the condenser unit was replaced. System was function checked and was running at the time of departure.