Get the Best HVAC Service
Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.
HVAC Replacement Service in Kyle, TX
Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?
If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.
When Should You Replace Your HVAC System?
- Your AC needs frequent, costly repairs.
- Your unit is over 10 years old and struggles to cool your home.
- Energy bills have steadily increased despite regular maintenance.
- Your home has uneven temperatures from room to room.
What Size AC Unit Do You Need?
The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.
Expert Air Conditioning Repair in Kyle, TX
If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:
- Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
- Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
- High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
- Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.
How Long Does AC Repair Take?
Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.
Heating and Cooling Service FAQs
If your air conditioner freezes, follow these steps to get your unit functioning again:
- Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
- Do not remove the ice by hand to avoid damaging the unit.
- After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly.
- Turn the AC back on to see if it operates without freezing over.
Homeowners can anticipate paying between $100 - $500 for air conditioner repairs.
A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.
The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.
If it's Garner, It's Guaranteed
We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.
Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.
Recent Jobs and Reviews in Kyle, TX
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.
Kyle, TX at a glance
Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX in June 2022.
The most recent job was on June 23, 2022.
Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.
Our Local Reviews by City
- Austin, TX (78)
- Buda, TX (331)
- Canyon Lake, TX (5)
- Creedmoor, TX (4)
- Dale, TX (1)
- Driftwood, TX (29)
- Dripping Springs, TX (26)
- Hays, TX (1)
- Kingsbury, TX (1)
- Kyle, TX (480)
- Lockhart, TX (15)
- Manchaca, TX (9)
- Martindale, TX (14)
- Maxwell, TX (3)
- Mountain City, TX (26)
- New Braunfels, TX (13)
- Niederwald, TX (15)
- San Marcos, TX (157)
- Seguin, TX (3)
- Uhland, TX (2)
- West Lake Hills, TX (1)
- Wimberley, TX (104)
- Woodcreek, TX (4)
Job Locations and Reviews
Performed service diagnostic. Diagnostic found that the capacitor on the condenser unit had failed. Options for repair were presented to customer and they chose to have the capacitor replaced today. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Condensate drain line on the exterior of the house had a slight rise in the drain line. The 90-degree fitting sitting on the ground was removed and the pipe was turned to create a gradual slope for the length of the line. Electrical disconnect confirmed in and on. System was running at the time of departure.
Diagnosed a failed capacitor at the condenser. Gave the client options and he chose to have the capacitor replaced and sign up for our maintenance plan. Completed repair and performed cool check on system. No other major issues found. Drain cleared and treated. Condenser coil cleaned.
Performed cool check on the AC system. No major issues found. Cleared drain and cleaned condenser coil. System is operational upon departure.
Installed new 3.5-ton Rheem system. Installed new inline filter dryer, pressure tested with dry nitrogen, and pulled a vacuum on the copper line set. Re-piped and insulated condensate drain. Removed old pad and place new pad on ground level. Sealed the copper penetration hole with steel wool and spray foam. Added new insulation on suction line and put new UV shield over it. Reattached existing plenums and sealed with mastic air lock.
Diagnosed a failed capacitor. Capacitor was not supplying correct voltage to the compressor. This caused the compressor to pull too many amps. Replaced capacitor and system resumed operation. Checked drains and temperature split; both were normal. Did observe that the fan motor had failed at least once while I was onsite and recommended replacement.
Installed new 4-ton Rheem gas system. Installed new inline filter dryer, pressure tested with dry nitrogen, and pulled a vacuum on the copper line set. Re-piped and insulated drain line and added ball valve and secondary float. Replaced supply plenum feeding the 2 zones. Replaced zone board. Replaced both upstairs and downstairs thermostats with Ecobee Pros. Replaced the pad on the condenser with a solid concrete pad.
When I arrived, the client informed me that his condenser fan motor had completely seized up yesterday. He informed me that he was able to get it to work by drilling a couple of holes in the motor and lubricating it. While performing the diagnostic I also found the contactor had failed. Presented options and he chose to have the motor replaced today and he will do the contactor himself. Completed replacement of fan motor.
Performed maintenance on AC system. No major issues found. Cleared drain and cleaned condenser coil. Presented Tom with option to renew maintenance and he chose to renew. System is operational upon departure.
Diagnosed a failed blower motor. Customer chose option to replace motor. Replaced motor on site. Completed safety and performance testing. System operational.
Diagnosed that a wire for the condenser had disconnect off the capacitor. Gave client her options and they chose to redo the spade clip and check all the wiring. Put new spade clip on the wire and double-checked reset of wiring. Also helped customer with thermostat and ensured operation of unit. System operational.
After performing the diagnostic, I found that the harness going to the motor was not sending voltage through. I made new connections and did away with the harness. Everything is coming on and working at this time.
Performed diagnostic and found that the battery cap had completely failed. I presented the client with their options, and they chose to have it replaced and sign up for the maintenance plan at this time. After completing repairs, I performed the AC tune-up everything is working at this time.
Diagnosed that the condenser was overly dirty and was causing high head pressure. Gave her options and she chose to do the basic level cleaning on the system. I removed the fan motor and top of condenser. Cleaned the coils with my hose and it lowered the head pressure to 450 from 500. Gave her more options to chemically clean the coil and she decided to leave the system as is. System is operational upon departure.
Performed maintenance on the AC system. No major issues found on the system. Customer was concerned about a noise coming from the inside unit, but I could not duplicate the noise today. I assume it was from the door insulation coming into contact with the blower wheel, so I taped the insulation to door. System operational.