Get the Best HVAC Service
Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.
HVAC Replacement Service in Kyle, TX
Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?
If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.
When Should You Replace Your HVAC System?
- Your AC needs frequent, costly repairs.
- Your unit is over 10 years old and struggles to cool your home.
- Energy bills have steadily increased despite regular maintenance.
- Your home has uneven temperatures from room to room.
What Size AC Unit Do You Need?
The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.
Expert Air Conditioning Repair in Kyle, TX
If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:
- Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
- Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
- High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
- Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.
How Long Does AC Repair Take?
Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.
Heating and Cooling Service FAQs
If your air conditioner freezes, follow these steps to get your unit functioning again:
- Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
- Do not remove the ice by hand to avoid damaging the unit.
- After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly.
- Turn the AC back on to see if it operates without freezing over.
Homeowners can anticipate paying between $100 - $500 for air conditioner repairs.
A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.
The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.
If it's Garner, It's Guaranteed
We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.
Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.
Recent Jobs and Reviews in Kyle, TX
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.
Kyle, TX at a glance
Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX in June 2022.
The most recent job was on June 13, 2022.
Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.
Our Local Reviews by City
- Austin, TX (78)
- Buda, TX (331)
- Canyon Lake, TX (5)
- Creedmoor, TX (4)
- Dale, TX (1)
- Driftwood, TX (29)
- Dripping Springs, TX (26)
- Hays, TX (1)
- Kingsbury, TX (1)
- Kyle, TX (480)
- Lockhart, TX (15)
- Manchaca, TX (9)
- Martindale, TX (14)
- Maxwell, TX (3)
- Mountain City, TX (26)
- New Braunfels, TX (13)
- Niederwald, TX (15)
- San Marcos, TX (157)
- Seguin, TX (3)
- Uhland, TX (2)
- West Lake Hills, TX (1)
- Wimberley, TX (104)
- Woodcreek, TX (4)
Job Locations and Reviews
Performed the AC tune-up and everything is working at this time. While performing the inspection I did find deficiencies with the system. The client is going to monitor it and will let us know on our next visit what she would like to do.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Air handler still had odor of mold/mildew inside as well as small spots coming back. Mold spots were wiped down by hand last visit. Customer wishes to continue monitoring the situation. Electrical disconnect confirmed in and on. System was running at the time of departure.
After performing the diagnostic, I found that the battery cap had completely failed. I also found that the condenser fan motor was showing signs of failure. I spoke to the client, and they chose to have the battery cap replaced today. After performing the repair everything is coming on and working at this time.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed maintenance on the AC system.
Replaced 2.5-ton furnace, evaporator coil, and condenser. Reattached existing plenums. Rebuilt condensate drain and insulated with Armaflex. Added safety switches for the drain. Re-piped the gas pipe and added new pieces of flu pipe to reattach it. Installed heat shield in front of furnace. Installed new in line filter dryer. Purged copper line set with dry nitrogen and pulled a deep vacuum. Charged up system to factory specs. Then performed and benchmark of the system. System is working properly at this time.
Replaced 2.5-ton furnace, evaporator coil, and condenser. Reattached existing plenums. Rebuilt condensate drain and insulated with Armaflex. Added safety switches for the drain. Re-piped the gas pipe and added new pieces of flu pipe to reattach it. Installed heat shield in front of furnace. Installed new in line filter dryer. Purged copper line set with dry nitrogen and pulled a deep vacuum. Charged up system to factory specs. Then performed and benchmark of the system. System is working properly at this time.
Replaced 2.5-ton furnace, evaporator coil, and condenser. Reattached existing plenums. Rebuilt condensate drain and insulated with Armaflex. Added safety switches for the drain. Re-piped the gas pipe and added new pieces of flu pipe to reattach it. Installed heat shield in front of furnace. Installed new in line filter dryer. Purged copper line set with dry nitrogen and pulled a deep vacuum. Charged up system to factory specs. Then performed and benchmark of the system. System is working properly at this time.
Replaced 2.5-ton furnace, evaporator coil, and condenser. Reattached existing plenums. Rebuilt condensate drain and insulated with Armaflex. Added safety switches for the drain. Re-piped the gas pipe and added new pieces of flu pipe to reattach it. Installed heat shield in front of furnace. Installed new in line filter dryer. Purged copper line set with dry nitrogen and pulled a deep vacuum. Charged up system to factory specs. Then performed and benchmark of the system. System is working properly at this time.
Performed service diagnostic. Diagnostic found that the secondary drain pan (31x32) was full of water and rusted. Primary drain was also clogged. Options for repair were presented to customer and they chose to proceed with water removal and drain clearing. Repairs were completed.
Diagnosed that the compressor was starting with high amps due to non-equalizing TXV which was causing the compressor safety board to trip and locking out the compressor. Gave the customer his options for repairs and he chose to have a hard start installed (per manufacture tech support recommendation). Performed repair and system was operational upon departure.
Performed maintenance on the AC system with no major issues found.
After performing the diagnostic, I found that there was a rubout on the high gas line. I also found multiple other deficiencies with the system. I presented repair options to the client, and they decided to have the system recharged. After completing repairs, the system is now cooling.
Performed maintenance on upstairs system. System was low on refrigerant. Performed leak check and found leak in evaporator coil. Presented repair options and client chose to have coil replaced. Installed new Carrier cased coil in attic. Recovered R-410A refrigerant and installed new line filter dryer. Pressure tested system for extensive leak check and pulled deep vacuum. Weighed in new R-410A and rebuilt drain line with SS-2 and SS-3 safety switches. Washed out condensers and installed new condenser fan motor. System operating at this time.
Performed maintenance on two systems and found no major issues. Both systems are operational.