Sign up today for our Gold Plan, now only $299/yr! (was $339)

Kyle TX Heating & Air Conditioning Services

Get the Best HVAC Service

Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.

Garner heating and air truck driving in kyle texas

HVAC Replacement Service in Kyle, TX

Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?

If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.

When Should You Replace Your HVAC System?

  • Your AC needs frequent, costly repairs.
  • Your unit is over 10 years old and struggles to cool your home.
  • Energy bills have steadily increased despite regular maintenance.
  • Your home has uneven temperatures from room to room.

What Size AC Unit Do You Need?

The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.

Expert Air Conditioning Repair in Kyle, TX

If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:

  • Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
  • Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
  • High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
  • Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.

How Long Does AC Repair Take?

Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.

Heating and Cooling Service FAQs

What should I do if my air conditioner freezes?

If your air conditioner freezes, follow these steps to get your unit functioning again:

  • Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
  • Do not remove the ice by hand to avoid damaging the unit.
  • After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly. 
  • Turn the AC back on to see if it operates without freezing over.
What is the average AC repair cost near Kyle TX?

Homeowners can anticipate paying between $100 - $500 for air conditioner repairs. 

Why is my air conditioner leaking water?

A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.

How much does a new HVAC system cost in Kyle TX?

The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.

If it's Garner, It's Guaranteed

We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.

Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.

Recent Jobs and Reviews in Kyle, TX

Rated 5.0 out of 5 stars based on 480 customer reviews

Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.

Kyle, TX at a glance

Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX in May 2022.

The most recent job was on May 16, 2022.

Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.

Job Locations and Reviews

Performed service diagnostic. Diagnostic found that the contactor in the condenser unit had failed. Options for repair were presented to customer and they chose to proceed. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed service diagnostic. Diagnostic found that the contactor in the condenser unit had failed. Options for repair were presented to customer and they chose to proceed. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.
Matt F.
Matt F. Checked in
Performed service diagnostic. Diagnostic found that the contactor in the condenser unit had failed. Options for repair were presented to customer and they chose to proceed. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.
Kyle, TX 78640
Ethan D.
Ethan D. Checked in
Installed new Payne 2.5-ton system in attic. Added new hanging drain pan and rebuilt drain with SS-2 and SS-3 safety switch. Added line filter dryer and pressure tested system for extensive leak. Pulled deep vacuum and weighed in factory charge. Reused thermostat and sealed all pressure points with air lock. System operating at this time.
Kyle, TX 78640
Ethan D.
Ethan D. Checked in
Diagnosed faulty drain system and homeowner chose to have it rebuilt with an SS-2 safety switch. Cleared drain line and verified switch operation. Dried drain pans and system operational.
Kyle, TX 78640
Kyle, TX - Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Matt F.
Matt F. Checked in
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Kyle, TX 78640
Kyle, TX - Performed service diagnostic. Diagnostic found that the transition above the air handler was not sealed and was leaking a large volume of air. Options for repair were presented to customer and they chose to have the transition resealed. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.
Matt F.
Matt F. Checked in
Performed service diagnostic. Diagnostic found that the transition above the air handler was not sealed and was leaking a large volume of air. Options for repair were presented to customer and they chose to have the transition resealed. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.
Kyle, TX 78640
Matt F.
Matt F. Checked in
Performed service diagnostic. Diagnostic found that the capacitor on the condenser unit had failed, and the condenser fan motor was not running. Options for repair were presented to customer and they chose to replace the capacitor. Repair was completed. System was running but it was discovered that the condenser fan was running in the wrong direction. Fan motor was reared and is now turning the correct direction. Electrical disconnect confirmed in and on. System was running at the time of departure.
Kyle, TX 78640
Matt F.
Matt F. Checked in
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. System had surge protection for furnace but not for the condenser unit. Options to install surge protection for condenser was presented to customer and they chose to move forward. Surge protection added to condenser and safety testing completed. Electrical disconnect confirmed in and on. System was running at the time of departure.
Kyle, TX 78640
Ethan D.
Ethan D. Checked in
Installed new 2.5-ton Rheem gas furnace in closet. Reused filter base and installed new line filter dryer. Pressure tested system for extensive leak check and pulled deep vacuum. Rebuilt drain line with SS-2 safety switch and cleared drain line with CO2. Reused thermostat and sealed all pressure points with air lock. System operating at this time.
Kyle, TX 78640
Max B.
Max B. Checked in
After performing the diagnostic, I found that the primary drain line was completely clogged and tripping the safety float switch. I presented the client with her options, and she chose to have it cleared at this time. After getting the system back up and running, I found that the capacitor on the outdoor unit is failing but still running. It is rated at 40/5 and reading 27.9/4.1 I presented options to repair this but the customer chose to wait until it fails.
Kyle, TX 78640
Performed service diagnostic. Diagnostic found that the easy start on the condenser unit (upstairs unit) had failed and was preventing the compressor from running. Capacitor for condenser unit had failed. Condenser fan motor for both systems showed signs of overheating. Options for repair were presented to customer and they chose to replace the capacitor and remove the easy start from the system. Also wishes to replace condenser fan motors on both units. Easy start was removed, and wiring was returned to factory specifications. Capacitor was replaced.
Performed service diagnostic. Diagnostic found that the easy start on the condenser unit (upstairs unit) had failed and was preventing the compressor from running. Capacitor for condenser unit had failed. Condenser fan motor for both systems showed signs of overheating. Options for repair were presented to customer and they chose to replace the capacitor and remove the easy start from the system. Also wishes to replace condenser fan motors on both units. Easy start was removed, and wiring was returned to factory specifications. Capacitor was replaced.
Matt F.
Matt F. Checked in
Performed service diagnostic. Diagnostic found that the easy start on the condenser unit (upstairs unit) had failed and was preventing the compressor from running. Capacitor for condenser unit had failed. Condenser fan motor for both systems showed signs of overheating. Options for repair were presented to customer and they chose to replace the capacitor and remove the easy start from the system. Also wishes to replace condenser fan motors on both units. Easy start was removed, and wiring was returned to factory specifications. Capacitor was replaced.
Kyle, TX 78640
Matt F.
Matt F. Checked in
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Furnace is missing heat shield. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned. Option to install heat shield was presented to customer and she would like to wait until winter. Electrical disconnect confirmed in and on. System was running at the time of departure.
Kyle, TX 78640
Kyle, TX - Diagnosed a failed condenser fan motor that would start but then overheat and fail. Once the fan cooled off it would start back up again but then it would overheat and shut itself down again. This caused the system to shut down on internal overload. After explaining what was happening to the client, she and I agreed that we should replace the condenser fan motor. The condenser fan motor has been replaced and the system is operational.
Ryan P.
Ryan P. Checked in
Diagnosed a failed condenser fan motor that would start but then overheat and fail. Once the fan cooled off it would start back up again but then it would overheat and shut itself down again. This caused the system to shut down on internal overload. After explaining what was happening to the client, she and I agreed that we should replace the condenser fan motor. The condenser fan motor has been replaced and the system is operational.
Kyle, TX 78640
Pulled and cleaned coil in air handler. Also pulled and cleaned blower housing and assembly. Added new line filter dryer and pressure tested system for extensive leak check. Pulled deep vacuum and verified system operation.
Pulled and cleaned coil in air handler. Also pulled and cleaned blower housing and assembly. Added new line filter dryer and pressure tested system for extensive leak check. Pulled deep vacuum and verified system operation.
Ethan D.
Ethan D. Checked in
Pulled and cleaned coil in air handler. Also pulled and cleaned blower housing and assembly. Added new line filter dryer and pressure tested system for extensive leak check. Pulled deep vacuum and verified system operation.
Kyle, TX 78640
Max B.
Max B. Checked in
Performed the AC tune-up. While performing the inspection I did find deficiencies with the system. I treated the biological growth inside the air handler with Biofresh and recommended our Stage 3 & 4 Breathe Easy packages to the client. I also found the battery cap to be low on value and recommended replacement. The client declined all repairs.
Kyle, TX 78640
Matt F.
Matt F. Checked in
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Capacitor on condenser unit had failed. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned. Options for repair were presented to customer and they chose to have the capacitor replaced. Repair was completed. Electrical disconnect confirmed in and on system was running at the time of departure.
Kyle, TX 78640
Kyle . Buda . San Marcos . Wimberley . Driftwood . Martindale . Manchaca . Lockhart . New Braunfels
Schedule Now Text Us Now
Award Winning Service
  • Google Guaranteed
  • Carrier Authorized Dealer Logo
  • Service Round Table Member Logo
  • Best Or North Hays Logo
  • Nate Certified Technicians Logo
  • National Comfort Institute Inc Logo