Get the Best HVAC Service
Garner Heating & Air Conditioning offers over 35 years experience in servicing, repairing, and replacing your HVAC system, so let us take that pressure off of you. We'll do the work - you enjoy the comfort. Call 512-392-2000 for all your HVAC replacement, repair and maintenance service near Kyle, TX or contact us online with any questions.
HVAC Replacement Service in Kyle, TX
Like all major appliances in your home, your HVAC system is made up of countless parts all working in concert to provide your home welcoming comfort. Those parts need to be properly maintained and cared for so you always have the warming heat or refreshing cool you need. But who has the time to do that themselves?
If your AC unit is more than 10-15 years old, replacing it could save you money on energy bills and repair costs. Upgrading to a new, energy-efficient system can improve comfort, reduce maintenance, and lower your electricity usage.
When Should You Replace Your HVAC System?
- Your AC needs frequent, costly repairs.
- Your unit is over 10 years old and struggles to cool your home.
- Energy bills have steadily increased despite regular maintenance.
- Your home has uneven temperatures from room to room.
What Size AC Unit Do You Need?
The right AC size depends on your home’s square footage, insulation, and layout. An oversized unit may cool too quickly without removing humidity, while an undersized unit will struggle to keep up. Our HVAC experts perform a full evaluation to recommend the best system for your home.
Expert Air Conditioning Repair in Kyle, TX
If your AC isn’t keeping up with the heat, it might be time for repairs. Common signs your air conditioner needs servicing include:
- Warm air blowing from vents – This could indicate low refrigerant levels or a failing compressor.
- Unusual noises – Grinding, squealing, or rattling sounds could mean parts are loose or worn out.
- High energy bills – If your energy costs are rising, your system may be struggling to run efficiently.
- Frequent cycling – If your AC turns on and off repeatedly, it could be a sign of thermostat issues or restricted airflow.
How Long Does AC Repair Take?
Most AC repairs can be completed within a few hours, depending on the problem. Our team arrives with the tools and parts needed to diagnose and fix issues quickly. If a major repair is needed, we’ll discuss your options and provide transparent pricing before starting any work.
Heating and Cooling Service FAQs
If your air conditioner freezes, follow these steps to get your unit functioning again:
- Turn off the unit from the breaker. This will allow the unit to thaw. FYI, thawing could take an entire day.
- Do not remove the ice by hand to avoid damaging the unit.
- After thawing, dry the coils by turning back on your unit but on the fan setting only. This helps circulate air and dry the coils quickly.
- Turn the AC back on to see if it operates without freezing over.
Homeowners can anticipate paying between $100 - $500 for air conditioner repairs.
A faulty drain pan, loose connections, or worn-out components can lead to costly water damage. Catching minor issues early prevents major headaches down the road.
The cost to replace a heating and cooling system typically ranges from $5,000 to $15,000, depending on factors like the size of the home, system efficiency, and installation requirements.
If it's Garner, It's Guaranteed
We know it can be difficult to bring someone into your home and trust them to do the work right. That's why Garner offers at 100% satisfaction guarantee on all the service we perform. We want you to be certain, before we even step through the door, that you're going to get the right solutions, at the right price, with the right quality.
Give us a call at 512-392-2000 and make us your partner in comfort today. Of course, the best opinion on our work comes from your neighbors. See what they have to say about Garner Heating & Air Conditioning below.
Recent Jobs and Reviews in Kyle, TX
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and appreciation. Customers consistently express gratitude for the professionalism, punctuality, and expertise demonstrated by the service team. There is a strong recurring theme of technicians being knowledgeable, thorough, and excellent communicators who take time to explain issues, answer questions, and provide helpful advice without applying undue pressure. Many reviewers highlight the courteous and respectful nature of the staff, noting details such as wearing shoe covers, protecting work areas, and leaving spaces clean after completion. Timeliness emerges as another dominant positive trend, with numerous mentions of technicians arriving on time or even early, completing work efficiently, and providing same-day service. Customers frequently express confidence in the quality of work performed, even under challenging conditions like extreme heat, and many indicate strong loyalty, stating they will use the service again and recommend it to family and friends. The emotional tone is enthusiastic and appreciative, with reviewers describing their experiences as "great," "excellent," "fantastic," and "outstanding." Overall, the reviews convey a sense of trust, reliability, and exceptional customer care that has clearly resonated with clients.
Kyle, TX at a glance
Garner Heating & Air Conditioning Inc has completed 15 jobs in Kyle, TX between April 2022 and May 2022.
The most recent job was on May 11, 2022.
Garner Heating & Air Conditioning Inc has completed 527 jobs in Kyle, TX in the last 12 months. The first job there was in July 2018.
Our Local Reviews by City
- Austin, TX (78)
- Buda, TX (331)
- Canyon Lake, TX (5)
- Creedmoor, TX (4)
- Dale, TX (1)
- Driftwood, TX (29)
- Dripping Springs, TX (26)
- Hays, TX (1)
- Kingsbury, TX (1)
- Kyle, TX (480)
- Lockhart, TX (15)
- Manchaca, TX (9)
- Martindale, TX (14)
- Maxwell, TX (3)
- Mountain City, TX (26)
- New Braunfels, TX (13)
- Niederwald, TX (15)
- San Marcos, TX (157)
- Seguin, TX (3)
- Uhland, TX (2)
- West Lake Hills, TX (1)
- Wimberley, TX (104)
- Woodcreek, TX (4)
Job Locations and Reviews
Trip 1 - Upon inspection of the system, I found a leak in the right side, halfway down the coil. Flue needs a 3 to 4 reducer for replacing the flue that is broken. Need to order coil first thing Monday morning. Charged up system to get them some cool air for the weekend. Trip 2 - Replaced Rheem cased coil in closet. Rebuilt flue pipe and secured with screws. Rebuilt drain line with SS-2 safety switch and added line filter dryer. Pressure tested system for extensive leak check and pulled deep vacuum. Weighed in factory charge and re-piped gas line. System operating at this time.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Bacteria prevention system, air purifier and surge protection were all functioning. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Installed Payne 3.5-ton system in attic. Sealed new transition and rebuilt drain line with SS-2 and SS-3 safety switches. Added line filter dryer and pressure tested system for extensive leak check. Pulled deep vacuum and weighed in charge. Reused thermostat and replaced upstairs drain pan. Replaced condenser (Square D) breaker and verified system operation.
Performed the AC tune-up. While performing the inspection I did find deficiencies with the system. I presented my findings to the client, but they declined all repairs at this time.
Installed new Rheem 4-ton gas system in attic. Added new return and supply plenums and replaced 20x25 media filter. Rebuilt drain line with SS-2 and SS-3 safety switches. Installed surge suppressor on indoor unit and ICM493 for condenser. Added Ecobee Pro thermostat with line filter dryer. Pressure tested system for extensive leak check and pulled deep vacuum. Weighed in charge and verified system operation.
Upon inspection of the system, I found a cap the covers the copper on a new coil stuck in the pan and not allowing water to drain from the pan. I removed the cap and it began to drain properly.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Air filter replaced. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed the AC tune-up. While performing the inspection I did find deficiencies with the system. I presented the client with his options, and he would like us to email an estimate.
Performed the AC tune-up. While performing the inspection I did find deficiencies with the system. I presented the client with his options, and he would like us to email an estimate.
Trip 1 - Performed service. Diagnostic found that the blower motor has failed. Blower wheel was also dirty. Repair options presented and client has decided to move forward. Will order motor and return once received to complete repairs. Trip 2 - Repair was completed. System is up and running. Performed AC cool check. No other major issues were found. Drain line cleared and treated condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.
Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure. Client is moving so chose not to renew maintenance plan.
Trip 1 - After performing the diagnostic, I found that the fresh air for the chimney was coming apart because the cover on the outside of the roof is completely missing. We will need to install a new fresh air cover with a 4" collar for the flex to hook up to. We will also need a small amount of 4" fresh air flex to splice onto. We will return to complete the work. Trip 2 - Performed the repairs for the fresh air for the chimney. Installed a new 4" fresh air cover with a screen inside. Sealed the cover to the exterior of the chimney with a silicon to prevent any water penetrating it. Reconnected the 4" flex to the collar and everything is working at this time.
Performed AC cool check. Check of electrical, mechanical, safety, and performance of the system. No issues where found. Drain line cleared and treated. Condenser coil cleaned. (Customer is moving to Lakeway and will not be needing to renew maintenance agreement.) electrical disconnect confirmed in and on. System was running at the time of departure.
After performing the diagnostic, I found that the fresh air for the chimney was coming apart because the cover on the outside of the roof is completely missing. We will need to install a new fresh air cover with a 4" collar for the flex to hook up to. We will also need a small amount of 4" fresh air flex to splice onto. We will return to complete the work. Performed the repairs for the freshair for the chimney. Installed a new 4" fresh air cover with a screen inside. Sealed the cover to the exterior of the chimney with a silicon to prevent any water penetrating it. Reconnected the 4" flex to the collar and everything is working at this time.