Kyle TX Heating & Air Conditioning Services

Service diagnostic found that the safety float switch on the secondary drain line has failed. The float switch is not passing the 24v signal to the condenser unit. Options for repair were presented to the homeowners. They chose to have the float switch replaced and to sign up for maintenance. I replaced the float switch and function tested the system. The system is now operational. The system was running at the completion of service.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was new and had been recently replaced by the homeowner. No major issues were found. The system was running at the completion of service.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was replaced with a client supplied filter. No major issues were found. The system was running at the completion of service.

Performed heater tune-up on a Carrier heat pump system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. Taped the insulation on the air handler door panel. Verified outdoor compressor wiring is secure and washed the outdoor coil. No major issues were found. The system is operational at this time.

Heat check completed on one horizontal gas system. Drain line was flushed and treated. Flame sensor was cleaned. All mechanical and electrical components found within manufacturer specifications. The system is heating properly at this time.

Performed heater tune-up on a Carrier heat pump system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. Replaced the air filter for the air handler and fresh air system with a client supplied filter. Sealed some air straws on the air handler. Secured the outdoor compressor wiring and washed the outdoor coil. No major issues were found. The system is operational at this time.

Heat check has been completed for horizontal 90% gas Lennox. Drain line was flushed and treated. Flame sensor was cleaned. All mechanical and electrical components were found within manufacturer specifications. I did change the fresh air damper control from 42 minutes to the off position per homeowners request. No major issues were found. The unit is heating properly at time of departure.

Heat check has been completed for horizontal 90% gas Lennox. Drain line was flushed and treated. Flame sensor was cleaned. All mechanical and electrical components were found within manufacturer specifications. I did change the fresh air damper control from 42 minutes to the off position per homeowners request. No major issues were found. The unit is heating properly at time of departure.

Heat check completed on a vertical heat pump. Drain line was flushed and treated. Coils were cleaned. All mechanical and electrical components were checked and found within manufacturer specifications. UV lights are operational. No major issues were found. The system is heating properly at time of departure.

Heat check completed on a vertical gas system. Drain line was flushed and treated. Flame sensor was cleaned. All mechanical and electrical components were tested. I did find extra buildup on the blower wheel. I went over my findings with the homeowner. No other major issues were found. The system is heating properly at time of departure.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was clean and had been replaced by the homeowner before arrival. The system sterilizers are operational. No major issues were found. The system was running at the completion of service.

Performed heater tune-up on a Carrier heat pump system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. Taped and secured the insulation on the door panel. I also found a small amount of biological growth and wiped it down as best as possible. No other issues were found. System is operational at this time.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was replaced with a client supplied filter. I did find some biological growth inside the air handler. I wiped the air handler down to remove the biological growth. Options for repair were presented to the homeowner and she chose to have system sterilizers installed in the system. I installed the system sterilizers in the air handler. I function tested the system and the system was running at the completion of service

Service diagnostic found the supply air sensor was not reading accurate air temperature. My temperature probes were reading 130 degree air while the temp sensor was reading over 200 degrees. I presented repair options and the homeowner chose to have the supply air sensor replaced. I replaced the air sensor and cycled power at the thermostat. Verified gas pressures are within range for operation. I also cleaned the flame sensor at no additional cost. The return air filter was replaced with a client supplied filter as well. No other issues were found. The system is operational at this time.

Performed heater tune-up on a Carrier straight electric heating system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. No major issues were found. The system is operational at this time.