Niederwald TX Heating & Air Conditioning Services

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. Electrical heat strips confirmed on and operational. System was set to customer’s desired settings and was running at the time of departure. Please see attached checklist for full tune-up details.

Performed semiannual maintenance one propane fired heating system. Inspected all Performance, Mechanical and Safety Systems. Turned heating system on and allowed system to run. Heard the smoke alarm in the main house go off and noticed my propane pressures for the LOW STAGE were double what they should be. Adjusted pressures for optimal firing and found everything to be operating at this time. Changed one 16x25 F100 filter that the homeowner supplied.

Performed service diagnostic. Diagnostic found that the capacitor on the condenser unit had failed. Options for repair were presented to customer and they chose to have the capacitor replaced. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed maintenance on the AC system. I found a clogged primary drain which I cleared treated. Also cleaned drain pan and then tested water flow. I also found growth in the coil cavity. On the outside system, I found that the condenser fan motor had overheated, and the capacitor was below value. The client opted to have the capacitor changed today. Repair completed and condenser washed off. System operational.

Diagnosed clogged drain. I cleared and treated the drain. Also treated the drain pan and poured a gallon of water down the drain to confirm it was draining. I checked charge with no issues. The condenser capacitor was low, and I also found growth in the air handler.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Some mold was found inside the air handler. Condensate drain lines did not have a safety switch. Options for repair were presented to customer and they declined all repairs at this time. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.

Installed a 22,000 BTU High Wall Ductless system in the garage. Ran new line set and condensate drain line. Also ran new control wiring and added surge protection. Ran wall penetration and line set in line hide. System operating at this time.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System is running at time of departure.

Performed AC tune-up and everything is working at this time. Replaced media filter as well. See attached checklist for full tune-up details.

Please see Ryan for quote price reasoning

Installed new Carrier 2.5-ton straight electric system in attic. Added new drain pan and vibration isolators. Installed new liquid line filter drier and pressure tested system for extensive leak check. Pulled deep vacuum and charged system to factory specs. Added new supply and return plenums and rebuilt primary and secondary drains. Installed new SS-2 and SS-3 safety switches. Added new Ecobee thermostat and changed disconnect breaker inside. Sealed all pressure points with mastic tape and air lock and installed attic insulator.

Office: Customer wants to sign up for Gold maintenance. Please call by Tuesday to collect.

When I arrived, I found a small refrigerant leak on the liquid line from the installation performed by another company. I gave the customer his options and he chose to have it repaired at the gold level at this time. After performing the gold level repair and recharging the system everything is working at this time.

Performed Platinum level repair. Installed new voltage distributor, voltage enhancer & compressor saver. Performed electrical termination service and checked system performance. System working at completion of service.

Performed Platinum level repair. Installed new voltage distributor, voltage enhancer & compressor saver. Performed electrical termination service and checked system performance. System working at completion of service.

Performed Platinum level repair. Installed new voltage distributor, voltage enhancer & compressor saver. Performed electrical termination service and checked system performance. System working at completion of service.

Performed Platinum level repair. Installed new voltage distributor, voltage enhancer & compressor saver. Performed electrical termination service and checked system performance. System working at completion of service.

We have a lifetime workmanship guarantee, and we stand behind it. I just fixed a small hole in a soldered joint that one of our service guys, Max, found. Our client was not even aware there was a problem. This was all done at no cost to the customer.

Fixing a heat pump that was tripping a breaker. No heat call and now they have plenty of heat.

Heat pump work.

Working on a heat pump.

Installing a home comfort system. New Carrier heat pump system installation today. As well as a full duct cleaning with our Brush Beast duct cleaning system.

Performing a maintenance heater tune-up to ensure Optimal Performance out of this gas furnace system.

Performing Heat inspection through our Maintenance Savings Plan. Making sure 10 year gas system is in optimal working condition.