Wimberley TX Heating & Air Conditioning Services

Performed cooling maintenance on two systems. Checked electrical, mechanical and performance of both systems.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated the drain line and washed condenser coil. No issues were found. System is on and running at this time.

Performed cooling maintenance on 2 systems. Checked electrical, mechanical and performance of both systems. Cleared and treated both drain lines and washed both condenser coils

Blower wheel on the guest house system was cleaned. Condenser fan motor on the main house was replaced. Systems where function checked and were running at the time of departure.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Options for system enhancements were presented to customer and they declined at this time. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Also checked the heat strips per customer request. Cleared and treated drain line and washed condenser coil. Found dirt and mold in the indoor blower wheel and the indoor coil is rusting. Also found the outdoor fan motor overheating and leaking lubricant. Customer chose to have the fan motor replaced at this time. Repair completed and system operational.

Performed cooling maintenance on two systems. Checked electrical, mechanical and performance of both systems. Found both condenser capacitors to be under value. I also found that the UVC light for the system on the right had burnt out. Please see attached checklist for full tune-up details. I offered the customer options to repair and add surge protection for both indoor systems. She chose to have the capacitors replaced, the UVC light replaced, and surge protection installed on both indoor systems. After completing the work, I turned power back on and both systems are on and running at this time.

Performed service diagnostic. Diagnostic found that the system is low on refrigerant. Leak check was performed and no leak was detected. Options for repair were presented to the customer and they chose to have refrigerant added to the system. We will need to schedule a return visit to have the system charged with refrigerant. System was running but not cooling at the time of departure. System was charged with refrigerant and was running at the time of departure.

Replaced the indoor head evaporator coil, pressure tested with nitrogen and pulled a vacuum on the copper line set. Charged system to factory specifications and verified system operation.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. System sterilizers are operational. Surge protection is operational. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed heat check on two systems. Checked electrical, mechanical, safety, and performance of the systems. No major issues were found. Drain lines cleared and treated. Condenser coils cleaned. Electrical disconnects confirmed in and on. Systems were running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Some mold/mildew was found inside the air handler. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned.

Performed semiannual maintenance on one heat pump inverter system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Did note the beginning stages of microbial growth inside the indoor air handler unit located in the attic. Found blower wheel fins beginning to have growth, along with growth on the drain pan. I did recommend installing our Stage 3 Breathe Easy Package to eliminate future spreading of microbial growth but the homeowner declined at this time.

Performed heat check on two systems. Checked electrical, mechanical, safety, and performance of the systems. Drain lines cleared and treated. Condenser coils clean. I did find the filters to be undersized for the cabinet. Brought this to the customer’s attention and explained that they need to get the correct Honeywell filter for the cabinet. No other major issues were found.

Performed heat check on two systems. Checked electrical, mechanical, safety, and performance of the system. Blower wheel on the guest house system is dirty. Condenser fan motor on the main house is showing signs of overheating. Evaporator coil on the main house is corroded. Drain lines cleared and treated. Condenser coils clean.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Condenser fan motor is showing signs of overheating and is leaking grease. Some mold/mildew was found inside the air handler. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned. Options for repair were presented to the customer and they chose to have the condenser fan motor replaced today. Repair was completed. System was function checked. System was running at the time of departure.

Performed semiannual maintenance on two heating systems. Inspected one heat pump heating system and one straight electric heating system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Homeowner had filters for us to change when we arrived so we changed and dated filters with today’s date. Everything is working at this time. Used my leaf blower to blow all of the fallen leaves that have covered the bottom portions of the outdoor unit to allow the system to breathe properly and to allow access to the service valves of the units.

Performed semiannual maintenance on one heat pump heating system. Inspected all Performance, Mechanical and Safety Systems. Changed one AprilAire filter inside system. Verified that the Stage 3 & Stage 4 Breathe Easy system sterilizer and air purifiers are on and operational per design. Verified all Surge Protection Devices are green lit and operating. Did verify proper humidity levels inside attic and continued to document the humidity inside the attic periodically.

Performed semiannual maintenance on one heat pump heating system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Our Stage 3 Breathe Easy System Sterilizers are operating per design.

Performed semiannual heat pump maintenance on one heat pump heating system. Inspected all Performance, Mechanical and Safety Systems. The current filter installed is dirty from dust and the homeowners did not have an extra filter today so I was unable to change it out. Verified everything is operating within the manufacture’s specifications for operation. Heating & AC maintenance complete.