HVAC Service In Buda, TX

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter changed with customer supplied filter. No major issues were found and system running at time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter changed by customer before arrival. No major issues were found and system running at time of departure.

Found the indoor blower motor has failed; it would not ramp up to full speed. Removed the failed motor and installed a new indoor motor. Tested the cooling system and verified system startup. I also adjusted the dip switches to ensure proper airflow. Verified everything was operating within manufacture’s specifications for operation. Everything is working at this time.

Spoke with the homeowner and they stated that they had the gas company come over because one of their guests smelled gas in the home. The gas company narrowed it down to a leak at the black iron pipe fitting between the flex line and the pipe connecting into the furnace gas valve. After inspection, I did note there to be a severe amount of rust on the coupling fitting. Recommended repair of the gas line. In the meantime, I have turned off the shutoff valve for the gas furnace closet until repairs can be completed. Installed new flex line. Removed the rusted-out connection fitting and replaced with a new fitting. Gas leak tested new fittings and started up system. Verified fuel pressure was at correct nominal rating and completed a CO check of the interior space. No gas leaks found and everything is working at this time.

AC Service: In response to a cooling system's temperature sensors inaccurately assessing room temperatures, we embarked on a precision-driven calibration process. This meticulous procedure aimed to rectify the temperature sensing issues by ensuring that the sensors accurately gauged the room's climate. Through the calibration process, we guaranteed precise cooling control. The outcome of this detailed effort was a cooling system that not only operated efficiently but also consistently delivered the desired level of comfort, as it now responded accurately to the room's climate, ensuring the homeowner's satisfaction and energy savings.

AC Repair: When addressing an AC system fraught with electrical problems, our troubleshooting process led us to a diagnosis of a malfunctioning circuit board. With a commitment to restoring the unit's optimal functionality, we expertly executed a replacement of the circuit board. This meticulous procedure ensured that the electrical aspects of the AC system operated smoothly and without interruptions. As a result, the homeowner enjoyed a consistently performing AC unit, free from disruptions caused by electrical issues, and the assurance of a comfortable indoor environment.

Indoor Air Purification Installation: At the request of a homeowner seeking elevated indoor air quality, we meticulously installed a UV air sterilization system. This cutting-edge system is designed to eliminate harmful bacteria and viruses present in the air. Our installation process involved integrating UV lamps into the existing HVAC system, ensuring thorough air purification throughout the home. This provided the homeowner with a safer and healthier living environment, as the UV system effectively neutralized airborne pathogens and allergens.

HVAC Repair Service: To address voltage fluctuations that were causing disruptions in the AC unit's performance, we conducted an installation of a voltage regulator. This intricate process involved strategically connecting and configuring the regulator within the electrical system. By doing so, we ensured a stable and consistent power supply for the air conditioner, effectively eliminating the issue of voltage-related disruptions. This meticulous installation guaranteed that the AC unit operated at its optimal performance levels, providing the homeowner with reliable and uninterrupted cooling, regardless of electrical fluctuations.

AC System Replacement: In response to a residential client's request to replace their aging air conditioning system, we embarked on a comprehensive replacement project. The outdated AC unit, which had been experiencing reduced efficiency and frequent breakdowns, was swapped out for a modern and energy-efficient model. Our meticulous installation involved adjusting the new system's size and configuration to seamlessly integrate with the existing ductwork and electrical connections, guaranteeing optimal cooling performance and energy savings for the homeowner. This upgrade ensured the client enjoyed reliable and efficient air conditioning.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter clean. No major issues were found and system running at time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter changed by customer before arrival. No major issues were found and system running at time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line was cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter changed by customer before arrival. No major issues were found and system running at time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter changed with customer supplied filter. No major issues found and system running at time of departure.

Replaced the evaporator coil. Replaced the in-line filter dryer, pressure tested with dry nitrogen and pulled a vacuum on the copper line set. Charged system to factory specs and checked operation of the system. The system is working properly at this time.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter changed with customer supplied filter. No major issues found. The homeowner brought concerns about the ductwork being dirty to my attention. After inspecting the ductwork, I found that it is in fairly good shape and the return grilles just need to be cleaned. The homeowner also asked to have surge protection added to outside unit. Installed surge protection and the system is running at time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filters clean. No major issues were found and system running at time of departure. Plea

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter was clean. No major issues were found and system running at time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Checked filter and it was clean. No major issues were found and system running at time of departure.

Replaced head unit and recharged system. System operational at completion of repairs.