HVAC Service In Buda, TX

Performed diagnostic. I found that the thermostat was short cycling the system. While inspecting the system I found it low on refrigerant and it also has a dirty blower wheel. I spoke to the homeowner, and he chose to just replace the thermostat and add refrigerant at this time. I installed a new thermostat and cycled it. I also added 1lbs 13oz of refrigerant to the system and performed a leak check. No leak was found. Everything is operational at this time.

Performed diagnostic on the upstairs system. I found that the breaker at the air handler has failed and was not passing 240v to the transformer. I presented options to repair and the customer chose to have the breaker replaced at this time. I replaced the breaker and cycled the thermostat. System is on and working at this time.

Performed diagnostic and found the primary drain line backed up. Cleared and treated drain line and reset the HVAC system. Inspected all Performance, Mechanical and Safety Systems. Everything is working at this time.

Replaced both capacitors and fan motors today. Cleared and treated drain lines. Condenser coils cleaned. Both systems are operational. Replaced both return plenums and installed Aprilaire 2410 filter cabinets and filters to each system. Sealed with mastic air lock and verified system operation. Everything is working at this time.

Found the outdoor condenser fan motor seized up. Installed new fan motor and programmed to match system specifications. Reset the cooling system and inspected all Performance, Mechanical and Safety systems. Everything is working at this time.

Found system low on refrigerant. Used my electronic leak detector and located a leaking Schrader core outside. Replaced Schrader valve and recharged system with 5# of R410A. Verified system subcooling matched the charging chart of the system. Had a 5°SC after the system stabilized. Everything is working at this time.

Performed semiannual maintenance on one cooling system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Indoor system drain line cleared and treated. Filter had already been changed by homeowner before arrival. Outside condenser refrigerant pressures are within range and condenser cleaned. Noticed that the capacitor was below value on outdoor system. No other major issues were found. Replaced capacitor and system is running at time of departure.

HVAC Maintenance. A residential property experienced energy waste due to poorly insulated ducts. We addressed this issue by adding insulation to the ducts, significantly reducing thermal losses and enhancing the overall cooling system's efficiency.

HVAC Maintenance. In a newly constructed home, we were tasked with designing and installing a complete ductwork system. Our experts designed a custom duct network, ensuring efficient cooling and heating, and providing optimal comfort to the residents.

AC Replacement Services. A commercial property faced increasing cooling demands that their old A/C system couldn't handle. Understanding their requirements, we recommended and installed a larger capacity air conditioner, perfectly meeting the cooling needs of their business.

HVAC Maintenance. A customer reported uneven cooling caused by leaky ducts. Our team conducted a comprehensive inspection, skillfully sealed the leaks, and optimized the ductwork to enhance airflow and improve the overall A/C performance, ensuring consistent comfort throughout the property.

AC Replacement Services. A homeowner's aging A/C unit broke down beyond repair, leaving them uncomfortable during hot days. To ensure their comfort, we assisted in selecting a suitable replacement and expertly installed a new, energy-efficient air conditioner, restoring a pleasant living environment.

HVAC Maintenance. When an A/C system experienced intermittent cooling issues due to a malfunctioning compressor, we swiftly diagnosed the problem and replaced the faulty component. The result was a seamless operation and uninterrupted cooling for the homeowner.

AC Replacement Services. A client seeking a more energy-efficient cooling solution approached us for assistance. After careful assessment of their needs, we recommended and installed a state-of-the-art, high-efficiency air conditioning system. This not only ensures reliable cooling but also helps the client save on energy costs.

HVAC Maintenance. Responding to a homeowner's report of inefficient cooling, I promptly arrived and conducted a thorough inspection. Diagnosing a refrigerant leak, I expertly repaired it and recharged the refrigerant to restore optimal cooling performance, ensuring the A/C system operates efficiently once again.

Performed diagnostic. I found that the primary drain line was clogged right before it connected to the condensate pump. The clog was backing up water into the coil pan and spilling it around the air handler. I cleared and treated the drain and vacuumed the water around the air handler. I also tested the condensate pump with a gallon of water. Everything is on and working at this time.

Performed diagnostic and I found that the primary drain line was clogged, and it was tripping the float switch. I also found two filters stuck inside the air handler under the evaporator coil. I removed the filters, cleared and treated the drain line and tested it with 2 gallons of water. System is now operational.

Performed AC tune-up on two systems. Cleared and treated drain lines. Condenser coils clean. No major issues were found.

Replaced OEM condenser fan motor. Tested system and it is now operational.

Replaced the mini split head inside of the garage. Pressure tested with dry nitrogen and pulled a vacuum on the copper line set. Weighed in factory charge and check operation. The system is working properly at this time.