Kyle TX Heating & Air Conditioning Services

Performed semiannual maintenance on one heat pump cooling system. Inspected all Performance, Mechanical and Safety Systems. Flushed and treated the condensate drain line. Did note the outdoor exhaust fan motor has overheated and is beginning to pull near the manufacture’s amp rating. Verified all other systems were operating within manufacture’s specifications for operation. Everything is working at this time

We arrived at the home to find the system off and the inside of the house very cold at around 62 degrees. We spoke to Celester about how the system had been performing. We made sure to rinse the condenser coil and clear the drain line. During our evaluation we found the system is in really good shape. The only concern that I had was that the outdoor fan motor was leaking oil and rusty. We brought this to the attention of Celester and made him some options. Celester elected to replace the condenser fan motor and also renew his membership with us. We performed the work and tested the system to make sure it was operating properly. Everything ran and is working well. We collected for the work performed. System is in working order at completion of appointment.

We arrived at the home to find the system off and the inside of the house very cold at around 62 degrees. We spoke to Celester about how the system had been performing. We made sure to rinse the condenser coil and clear the drain line. During our evaluation we found the system is in really good shape. The only concern that I had was that the outdoor fan motor was leaking oil and rusty. We brought this to the attention of Celester and made him some options. Celester elected to replace the condenser fan motor and also renew his membership with us. We performed the work and tested the system to make sure it was operating properly. Everything ran and is working well. We collected for the work performed. System is in working order at completion of appointment.

We arrived at the home to find the system off and the inside of the house very cold at around 62 degrees. We spoke to Celester about how the system had been performing. We made sure to rinse the condenser coil and clear the drain line. During our evaluation we found the system is in really good shape. The only concern that I had was that the outdoor fan motor was leaking oil and rusty. We brought this to the attention of Celester and made him some options. Celester elected to replace the condenser fan motor and also renew his membership with us. We performed the work and tested the system to make sure it was operating properly. Everything ran and is working well. We collected for the work performed. System is in working order at completion of appointment.

We arrived at the home to find the system off and the inside of the house very cold at around 62 degrees. We spoke to Celester about how the system had been performing. We made sure to rinse the condenser coil and clear the drain line. During our evaluation we found the system is in really good shape. The only concern that I had was that the outdoor fan motor was leaking oil and rusty. We brought this to the attention of Celester and made him some options. Celester elected to replace the condenser fan motor and also renew his membership with us. We performed the work and tested the system to make sure it was operating properly. Everything ran and is working well. We collected for the work performed. System is in working order at completion of appointment.

I arrived to find the system off. I spoke to Amy about how the system had been performing. I went over the system and discovered that the drain line is clogged. I cleared the drain after speaking with Virginia about what she’d like to do with the system. I also checked the refrigerant pressures and rinsed out the outdoor unit. I followed up the drain clearing with 1.5 gallons of hot water, and everything drained properly. I made sure that the system came on and off at the thermostat. System is in working order at completion of appointment.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. The air handler and blower wheel are clean. Blower motor capacitor is within value. Drain line was cleared and treated. Control wiring is tight. The condenser fan motor is in good condition. Condenser capacitor is within value. The contactor is in good condition, and I sprayed JS insecticide inside the panel to protect from insects getting into the contactor. The refrigerant charge is good, and the system is cooling at 7 degrees of sub cooling. Condenser coil cleaned. No major issues were found, and the system was running at the time of departure.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. The air filter is dirty, but the customer did not have a replacement at this time. He did say he would change it ASAP. The blower wheel has some dust on it. Blower motor capacitor is within value. The drain line was cleared and treated. The air purifier is operational and the surge protection for the furnace is also operational. The condenser fan motor is in good condition. Contactor and condenser capacitor are also in good condition. Refrigerant charge is with manufactures specs. Condenser coil was cleaned. No other major issues were found.

Replaced the TXV on the evaporator coil. Replaced the in-line filter dryer and pressure tested with dry nitrogen. Pulled a vacuum on the copper line set. Brought the system back to factory refrigerant specs. Cleared and treated the drain line. Checked operation of the system and it is working properly at this time.

Performed AC cool check on a Carrier Infinity system. Checked electrical, mechanical, safety, and performance of the system. Filter was changed with a customer supplied filter. The blower wheel is clean. Electrical wiring is tight. The drain line was cleared and treated. Surge protection for the furnace is operational. Condenser coil was cleaned. The condenser fan motor is in good condition. Surge protection for the condenser unit is also operational. No major issues were found, and the system is running at the time of departure.

On arrival the customer stated that he felt the air cooler downstairs than upstairs. I performed a cooling maintenance on the system. Checked all electrical, mechanical and performance of the system. I did find a partial clog at the evaporator coil and primary drain line connection. This caused water to back up and trip the water safety switch. I removed the clog and cycled the system. Cleared and treated the drain line and washed the outdoor coil. Both upstairs and downstairs supply and return air difference is between 15° to 20°. Refrigerant levels are good. No major issues were found. The system is operational at this time. See attached checklist for full tune-up details.

We went over the system and discovered the following: the contactor outside is pitted and charred and the outdoor fan motor is leaking oil. I brought this to the attention of the homeowner and gave him a few repair options. He elected to have the contactor and condenser fan motor replaced today. We got to work and replaced both of those components. We then tested the system, and everything is in proper working order. See attached checklist for full tune-up details.

We went over the system and discovered the following: the contactor outside is pitted and charred and the outdoor fan motor is leaking oil. I brought this to the attention of the homeowner and gave him a few repair options. He elected to have the contactor and condenser fan motor replaced today. We got to work and replaced both of those components. We then tested the system, and everything is in proper working order. See attached checklist for full tune-up details.

We went over the system and discovered the following: the contactor outside is pitted and charred and the outdoor fan motor is leaking oil. I brought this to the attention of the homeowner and gave him a few repair options. He elected to have the contactor and condenser fan motor replaced today. We got to work and replaced both of those components. We then tested the system, and everything is in proper working order. See attached checklist for full tune-up details.

We went over the system and discovered the following: the contactor outside is pitted and charred and the outdoor fan motor is leaking oil. I brought this to the attention of the homeowner and gave him a few repair options. He elected to have the contactor and condenser fan motor replaced today. We got to work and replaced both of those components. We then tested the system, and everything is in proper working order. See attached checklist for full tune-up details.