Kyle TX Heating & Air Conditioning Services

Performed heating maintenance on one heat pump system. Checked all electrical, mechanical and performance of the system. Cleared and treated the drain line and washed the outdoor coil. Customer provided a filter for replacement. As I was replacing the filter, I found a washable reusable filter stuck on the underside of the coil. I removed the filter to prevent air flow restriction on the system. No other major issues were found. Both UV lights and surge protectors are working. System is on at this time. See attached checklist for full tune-up details.

Performed heating maintenance on one heat pump system. Checked all electrical, mechanical and performance of the system. Cleared and treated the drain line and washed the outdoor coil. Customer provided a filter for replacement. As I was replacing the filter, I found a washable reusable filter stuck on the underside of the coil. I removed the filter to prevent air flow restriction on the system. No other major issues were found. Both UV lights and surge protectors are working. System is on at this time. See attached checklist for full tune-up details.

Performed heating maintenance on one heat pump system. Checked all electrical, mechanical and performance of the system. I found that one of the UV lights has burnt out and is not working. I informed the customer and presented options for replacement. She declined repairs at this time and asked us to check for microbial growth on the next visit. If there are any signs of it, she will have the light replaced at that time. No other major issues were found, and the system is working at this time. See attached checklist for full tune-up details.

Performed heating maintenance on one gas system. Checked all electrical, mechanical and performance of the system. Cleared and treated the drain line. Customer provided filters for replacement. No major issues were found, and the system was running at time of departure. See attached checklist for full tune-up details.

Performed heat check on an American Standard gas furnace. Checked electrical, mechanical, safety, and performance of the system. Drain line was cleared and flow tested with water. Drain line was treated. Air handler and blower wheel are clean. Flame sensor was cleaned and is operational. Inducer motor is drawing normal amps while running. Igniter is in value and operational. Thermostat was set to the customer’s desired temperature and the system was running at the time of departure. See attached checklist for full tune-up details.

Performed heat check on a Carrier gas furnace. Checked electrical, mechanical, safety, and performance of the system. Drain line was cleared and flow tested with water. Drain line was treated. All zones/dampers are operating normally. No major issues were found and the system was running at the time of departure. See attached checklist for full tune-up details.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. All heat strips activated. Filter was recently replaced by homeowner. Coil and indoor blower motor are clean. Outside condenser refrigerant pressures are within range and condenser is clean. Capacitor is within value. No major issues were found, and the system was running at time of departure. See attached checklist for full tune-up details.

Sealed all upstairs buckets, and return, to the sheetrock with mastic. Also sealed all flex connections as well as all plenum connections. Sealed all downstairs returns and buckets from downstairs with white silicone. Installed Aprilaire 1210 air filter and insulated zoning equipment that was there. Sealed both the new filter and the zoning equipment.

Performed heating maintenance on an 18-year-old gas system. Checked all electrical, mechanical and performance of the system. Cleared and treated the drain line. Customer provided filters for replacement. I did find the inducer motor is showing signs of wear and tear. I informed the customer, but she declined the repair. No other major issues were found, and the system is on at this time. See attached checklist for full tune-up details.

Performed heating maintenance on one furnace system. Checked all electrical, mechanical and performance of the system. Cleared and treated the drain line. Filters were replaced recently by the customer. The secondary drain line is connected to the secondary drain pan line. I informed the customer and suggested adding a water safety switch to the line and disconnecting it from the drain pan line. He declined the repair at this time. No other major issues were found, and the system is operational at this time. See attached checklist for full tune-up details.

Performed heating maintenance on a gas furnace system. Check all electrical, mechanical and performance of the system. Cleared and treated the drain line. The filter was replaced last month by the customer. I found that both system sterilizer bulbs had burnt up. I informed the customer and presented options for replacing them, but she declined repairs at this time. No other major issues were found, and the system is operational at this time. See attached checklist for full tune-up details.

Performed semiannual maintenance on one gas furnace system. Inspected all Performance, Mechanical and Safety Systems. I did change out one homeowner supplied 4” media filter. Adjusted fuel pressure to match system output rating to ensure 100% heating capacity of the system. I did find during my visual inspection of the unit that the pressure switch tubing had gotten tangled up inside the inducer motor wheel, which caused the tubing to split. I cut back the tubing to size to verify a proper fit and then secured it to avoid potential repeat issues. Also noticed that the fresh air control was not properly opening/closing the damper at the return plenum. I let Heather know this and she said that since the house is brand new, she’s having the home warranty tech come out later today. Verified everything was operating within manufacture’s specifications for operation. Everything is working at this time. See attached checklist for full tune-up details.

I checked over the unit and found everything to be in really great shape. All heating components checked out fine and are operating within spec. I did adjust the low pressure on the gas valve from 2.2” WC down to about 1.6” WC per the manufacturer’s instructions. I observed a temperature rise within range on the manufacturers label. System is in working order at completion of appointment. See attached checklist for full tune-up details.

I checked over the unit and found everything to be in really great shape. All heating components checked out fine and are operating within spec. I did adjust the low pressure on the gas valve from 2.2” WC down to about 1.6” WC per the manufacturer’s instructions. I observed a temperature rise within range on the manufacturers label. System is in working order at completion of appointment. See attached checklist for full tune-up details.

I checked over the unit and found everything to be in really great shape. All heating components checked out fine and are operating within spec. I did adjust the low pressure on the gas valve from 2.2” WC down to about 1.6” WC per the manufacturer’s instructions. I observed a temperature rise within range on the manufacturers label. System is in working order at completion of appointment. See attached checklist for full tune-up details.