Kyle TX Heating & Air Conditioning Services

I arrived at the home to find the system off and not running. I checked over the system and discovered the following: the flue pipe isn’t done up to our standard, the installing company ran a flexible gas line through the cabinet of the furnace, low voltage is being run through installer made holes, the platform wasn’t enlarged to account for the new furnace size, and the reason the system was in failure was due to a loose neutral at the high voltage junction box at the furnace. The homeowner elected to get the system back up and running. I remade new connections inside the junction box. I also checked the AC side of the system and the heating side of the system. He’s wanting to see if he can get in touch with the installation company to rectify the other issues.

I arrived at the home to find the system off and not running. I checked over the system and discovered the following: the flue pipe isn’t done up to our standard, the installing company ran a flexible gas line through the cabinet of the furnace, low voltage is being run through installer made holes, the platform wasn’t enlarged to account for the new furnace size, and the reason the system was in failure was due to a loose neutral at the high voltage junction box at the furnace. The homeowner elected to get the system back up and running. I remade new connections inside the junction box. I also checked the AC side of the system and the heating side of the system. He’s wanting to see if he can get in touch with the installation company to rectify the other issues.

I arrived at the home to find the system off and not running. I checked over the system and discovered the following: the flue pipe isn’t done up to our standard, the installing company ran a flexible gas line through the cabinet of the furnace, low voltage is being run through installer made holes, the platform wasn’t enlarged to account for the new furnace size, and the reason the system was in failure was due to a loose neutral at the high voltage junction box at the furnace. The homeowner elected to get the system back up and running. I remade new connections inside the junction box. I also checked the AC side of the system and the heating side of the system. He’s wanting to see if he can get in touch with the installation company to rectify the other issues.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter was recently changed by the homeowner. No major issues were found and system running at time of departure. Gas valve confirmed on.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Both heat strips activated. Filter was recently changed by homeowner. No major issues were found and system running at time of departure.

Performed heat check on a Carrier heat pump system. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Soft start on the system is operational and was starting at about 20 amps. See attached checklist for full tune-up details. Drain line was cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filters were clean. No major issues were found and system running at time of departure. Gas valves confirmed on. See attached checklist for full tune-up details.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter was dirty but the customer did not have a replacement. No other major issues were found and system running at time of departure. Gas valve confirmed on. See attached checklist for full tune-up details.

Performed heat check on a Goodman gas furnace. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line was cleared and treated. Air purifier is operational. Condenser coil was cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure. See attached checklist for full tune-up details.

Performed semiannual maintenance on one gas heating furnace system. Inspected all Performance, Mechanical and Safety systems. I did note that the electrical reading of the combustion exhaust motor is running over the rated specifications. I also noticed there to be a lot of rust forming on the heat exchanger, along with lots of stress marks along the heat exchanger tubing. No other major issues found. See attached checklist for full tune-up details. I cleaned out the drain. Spoke with the homeowner about my findings and will be sending her an estimate for the immediate repairs.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter changed with customer supplied filter. No major issues were found and system running at time of departure. Gas valves confirmed on. See attached checklist for full tune-up details.

Performed service diagnostic. Diagnostic found that the air handler and blower wheel are dirty. Capacitor on the blower motor is also below value. Noise was coming from the blower motor and sounded like vibration. Options for repair were presented to the customer and they chose to have the capacitor replaced and the blower wheel cleaned. She also chose to join our Maintenance Plan. I replaced the blower motor capacitor. Blower wheel was cleaned. I also taped up a small air gap in the panel door. System was function tested and is operational. The system is also running much quieter than when I first arrived.

Performed heat check on a Carrier Infinity heat pump system. Checked electrical, mechanical, safety, and performance of the system. I did find an aftermarket filter which is not ideal for a Honeywell filter base. I spoke with the customers advising them to use the Honeywell brand filter that will fit correctly. No other major issues were found. See attached checklist for full tune-up details. Drain line was cleared and flow tested with water. Drain line was treated. Surge protection is operational. Condenser coil clean. Electrical disconnects confirmed in and on. System was running at the time of departure.

Performed heating maintenance on a gas furnace system. Checked all electrical, mechanical and performance of the system. Filters were replaced before my arrival. I found that the blower wheel is dirty and presented options for cleaning. Customer declined repairs at this time. No other major issues were found. System is on at this time. See attached checklist for full tune-up details.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Heat exchangers have some rust forming on the system. Drain line was cleared and flow tested with water. Drain line was also treated. System was operating within specifications. No other major issues found. See attached checklist for full tune-up details.