Kyle TX Heating & Air Conditioning Services

Performed a/c tune-up on two American Standard straight cool systems. Checked the electrical, mechanical and performance systems of the units. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handlers. Did find the vertical system is low on R-22 and only has a 14-16 degree temperature split. Also found the outdoor starter and capacitor are showing wear and tear. The main system ductwork has high static pressure.

Diagnostics found a clogged primary drain line which had tripped the secondary float switch device. Homeowners chose to have the drain line flushed, cleared, and treated today and to sign up on our silver maintenance plan. I flushed and cleared the drain then treated it. I then function tested the system. Everything is working at completion of service.

Two system AC cool check completed on a vertical heat pump system and mini split system. Both outdoor coils were cleaned. Both drain lines were flushed and treated. All mechanical and electrical components were checked, along with refrigerant levels. I did find high in rush amps to the compressor on the Carrier system. Both systems are cooling at time of departure.

Performed a/c tune-up on a Carrier straight cool system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. Did find the Reme Halo air purifier has failed. The system also has high static pressure. I also found the outdoor starter is pitted at the contacts. No other issues were found. The system is operational at this time

Performed a/c tune-up on an American Standard straight cool system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. At the indoor system, I found the primary drain line was cracked at the threaded coil connection. There is no water safety switch on the secondary pan. The blower wheel has some dirt/dust build up. At the outdoor system, the fan motor is leaking lubricant. The starter is pitted at the contacts. The outdoor disconnect has wear and tear. I also found the system undercharged with refrigerant. Went over my findings with the homeowner and they chose to have the drain line repaired at this time. I repaired the drain line and watched the system run for ten minutes. Verified it is draining properly into the bedroom sink. The system is operational at this time.

Service diagnostic found the blower motor had failed and was not starting up. I also found the outdoor starter pitted at the contacts. Spoke with the homeowners and they chose to have the motor and starter replaced. Picked up the new motor from from the supply house. Removed the blower housing from the system. Removed the failed blower motor and installed and secured the new motor. I then removed the pitted outdoor starter. Installed the new starter and verified all wiring is tight. While changing out the motor, I did wash the blower wheel as well and secured the outdoor compressor wiring at no additional cost. Once work was completed, I function tested the system and verified everything is operational. The system is running at completion of service.

Performed AC cool check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was replaced with a client supplied filter. The condenser coil was cleaned. The surge protectors are operational. No major issues were found. The system was running at the completion of service.

AC cool check completed on a vertical heat pump system. Outdoor coils were cleaned. Drain line was flushed and treated. All mechanical and electrical components were checked and found within manufacturer specifications. No major issues were found. The system is operating properly at time of departure.

Performed AC cool check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter had been replaced by the client before my arrival. The condenser coil was cleaned. No major issues were found. The system was running at the completion of service.

Performed AC cool check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with water. I also treated the drain line. The air filter was replaced with a client supplied filter. The condenser coil was cleaned. No major issues were found. The system was running at the completion of service.

Performed AC cool check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was replaced with a client supplied filter. The condenser coil was cleaned. No major issues were found. The system was running at the completion of service.

Performed a/c tune-up on a Carrier straight cool system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line. Cleaned the exterior of the air handler and secured outdoor compressor wiring. I did find the flue pipe draft was not making an ideal connection at the inducer motor exhaust. I installed a flue pipe draft hood connector to fix the connection and prevent any carbon monoxide from leaking into the home when the furnace is running. This was covered under our Garner Guarantee. I also found the system was slightly undercharged with refrigerant. Spoke with the homeowner and he chose to have refrigerant added at this time. I added 13 oz of refrigerant. I then performed a leak search on the system but was not able to find any leaks. No other issues were found. The system is operational at this time.

Performed a/c tune-up on a Trane straight cool system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line. Cleaned the exterior of the air handler and washed the outdoor coil. I did find the system has high static pressure but due to the location there is no room for improvements. Also noticed the system has no surge protection devices. Repair options were presented to the homeowners. No other issues were found. The system is operational at this time.

Performed AC cool check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was clean and had been replaced by the homeowner. The condenser coil was cleaned. No major issues were found. The system was running at the completion of service.

Performed a/c tune-up on a Carrier straight cool system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. Secured outdoor compressor wiring and washed the outdoor coil. I did find the indoor thermostat was sending voltage for the blower motor to run even when set to auto. Also found the return air plenum is dirty and the outdoor starter is pitted. I spoke with the homeowner about my findings and she chose to have the thermostat replaced. I installed a new Carrier smart thermostat and showed the homeowner how to work the Carrier Smart Home App. Cycled power a few times with no issues. No other issues found. The system is now operational.