Kyle TX Heating & Air Conditioning Services

Heat check completed on a horizontal heat pump. Drain line was flushed and treated. Outdoor coils were cleaned. Air filter has been replaced. All electrical and mechanical components were found within manufacturer specifications. The system was running at the completion of service.

Heat check completed on a vertical heat pump system. Coils were cleaned. Drain line was flushed and treated. I did find locked rotor amps exceeding manufacturers limits to compressor. I went over repair options with the homeowner. No other issues were found. The system is running at completion of service.

Performed heater tune-up on a Carrier heat pump system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. Verified outdoor compressor wiring is secure and washed the outdoor coil. I did find one of the UV light has burnt up. I spoke with the homeowner and he chose to have it replaced. I replaced the UV bulb and cycled power at the thermostat. No other issues were found. The system is operational at this time.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. No major issues were found. The system was running at the completion of service.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was replaced with a client supplied filter. No major issues were found. The system was running at the completion of service.

Performed heater tune-up on a Carrier furnace system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line. Cleaned the exterior of the furnace and secured outdoor compressor wiring. No major issues were found. The system is operational at this time.

Heat check completed on a horizontal gas system. Drain line was flushed and treated. Flame sensor was cleaned. All electrical and mechanical components were found within manufacturer specifications. No major issues were found. The system is heating properly at time of departure.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with water. I also treated the drain line. The air filter was ready to be replaced. No major issues were found. The system was running at the completion of service.

Heat check completed for a horizontal gas system. Flame sensor was cleaned. Drain line was flushed and treated. I did find a gas leak on a connection point in between the gas shut off valve and the furnace. Connections were tightened down and retested for leaks. The furnace is heating properly at time of departure.

Heat check completed on a vertical heat pump. Drain line was flushed and treated. All mechanical and electrical components were found within manufacturer specifications. No major issues were found. The system is heating properly at time of departure.

Upon arrival Jim told me what all happened and that the unit was vibrating like crazy. I asked him to show me the unit and when we got over there I inspected the fan blades for ice. Jim then told me that they had poured hot water on the blades to remove the ice. He said after thawing the ice the vibration stopped. The ice is what was causing the unit the vibrate.

Heat check has been completed on a vertical heat pump system. Air filters were changed. Drain line was flushed and treated. Outdoor coils were cleaned. I did find the start up amps to the compressor were exceeding manufacturer specifications. No other issues were found. The system is running at completion of service.

Completed heat check for a vertical gas system. Flame sensor was cleaned. Drain line was cleared and treated. I did find the inducer draft motor slightly over amping. I went over my findings with the homeowner. No other major issues were found. The system was running at completion of service.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with water. I also treated the drain line. The air filters were clean and had been recently replaced by the homeowner. I found the blower motor capacitor was below value. Options for repair were presented to the homeowner and she chose to have the blower motor capacitor replaced. I replaced the capacitor and function tested the system. No other major issues were found. The system was running at the completion of service.

Performed heat check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was clean and had been replaced by the homeowners before arrival. No major issues were found. The system was running at the completion of service.