Kyle TX Heating & Air Conditioning Services

AC cool check completed on one six-year-old upflow Carrier heat pump. I found that the outdoor torque booster was starting to fail. I presented repair options to the homeowner, and he decided to replace the torque booster today. No other issues found at this time. The system is cooling properly at time of departure.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. I cleaned the condenser coil No major issues were found. The system was running at the completion of service.

AC cool check performed on horizontal Carrier system. All mechanical and electrical are within manufacturer specifications. No major issues were found. The system is cooling properly at this time.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I cleared the drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was clean and had recently been replaced. I cleaned the condenser coil and treated the inside of the electrical cabinet with JS insecticide to keep ants away from the contactor. No major issues were found. The system was running at the completion of service.

On arrival I spoke with the homeowner. He informed me that he had replaced the capacitor and contactor in the condenser unit attempting to repair the system. He also stated that the old contactor smelled burnt. I performed a service diagnostic and confirmed that the 24v signal to run the condenser was present at the condenser. I checked the new contactor the homeowner had installed and found that it was bad. Signal to close was not passing through the contactor. Options for repair were presented to the homeowner. He chose to have the contactor replaced. I replaced the contactor and function tested the system. During the function check I found that the condenser fan motor had also failed. I informed the homeowner about the bad condenser fan motor and they chose to have it replaced. I replaced the condenser fan motor and again function tested the system. After repairs, the system is now operational.

Performed A/C tune-up on a Carrier straight cooling system and checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line. Cleaned the exterior of the furnace and washed the outdoor coil. No major issues were found. The system is operational at this time.

AC cool check completed on four year old upflow Rheem inverter system. All mechanical and electrical are within manufacturer specs. No major issues found at this time. The system is cooling properly at time of departure.

AC cool check completed on a 12 year-old horizontal Carrier unit. During my inspection, I found a failed capacitor. I presented findings to the homeowner and they chose to replace the capacitor at this time. No other major issues found. The system is operating at time of departure.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. Condenser coil was cleaned. No major issues were found. The system was running at the completion of service.

On arrival, I spoke with the homeowner and he informed me he had a power outage this morning and the thermostat went blank afterwards. I performed a diagnostic and found that the air handler breaker has failed and will trip immediately even without power. I spoke with the homeowner and presented repair options. He chose to have the electrical repair done and also chose to sign up on our Gold Maintenance Plan. I removed the breaker at the air handler, stripped new wire, tightened the wire nut connections and wrapped them in electrical tape. I also replaced the return air filter. The system is operational at completion of service.

On arrival, I found the outdoor main breaker for the condenser had tripped. I inspected the wiring and found the common wire had burnt and that had caused the breaker to trip. I also found the filter is the incorrect size and there is no water safety switch on the secondary drain line. I presented repair options to the homeowner and she chose to just do the electrical repair for today. I stripped back new wire, added a new connection and verified all electrical connections are tight. I reset the breaker and the system is now operational.

Performed A/C tune-up on a Carrier straight cooling system and checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the furnace. Replaced the return air filters and vacuumed the air grilles. I then washed the outdoor coil. I did find the outdoor condenser fan motor is showing signs of overheating. I presented the homeowner with repair options and she agreed to have it replaced. I replaced the condenser fan motor and cycled power at the thermostat. No other issues were found. The system is operational at this time.

AC cool check completed on a horizontal Carrier system. All mechanical and electrical are within manufacturer specs. No major issues were found. The system is operating properly at this time.

AC cool check completed on 12 year-old vertical heat pump system. I found the condenser fan motor leaking lubricant. No other major issues found. The system is cooling properly at this time.

I performed the service diagnostic and found that the capacitor on the condenser unit had failed. The failed capacitor prevented the condenser fan motor from running and the compressor had shut down on thermal lockout. Options for repair were presented to the homeowner. The homeowner chose to have the capacitor replaced today. I cooled the compressor with water and replaced the capacitor. I then function tested the system and the system is now operational.