Kyle TX Heating & Air Conditioning Services

AC cool check completed on horizontal Carrier system. I found that the blower wheel is dirty, the emergency drain pan is rusted, and the condenser fan motor is leaking lubricant. No other major issues found.

AC cool check completed on 18 month old horizontal Carrier system. Drain line has been cleared. All mechanical and electrical are within manufacturer specs. No major issues found. The system is operating properly at this time.

AC cool check completed on 10 year-old horizontal Carrier system. Drain line has been cleared. All mechanical and electrical within manufacturer specs. No major issues found. The system is cooling properly at this time.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was clean and had been recently replaced by the customer. Condenser coil was cleaned. I also treated the electrical cabinet on the condenser with JS insecticide to keep ants away from the contractor. No major issues were found. The system was running at the completion of service.

The service diagnostic found that the capacitor on the condenser unit had failed. The condenser fan motor also showed signs of overheating. Options for repair were presented to the customer and he chose to replace the capacitor for the condenser unit. I replaced the capacitor and function tested the system. I also treated the electrical cabinet on the condenser with JS insecticide and rinsed off the condenser coil. The system was running at the completion of service.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with water. I also treated the drain line. Condenser coil was cleaned. No major issues were found. The system was running at the completion of service.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I cleared the drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was replaced with a client supplied filter. I also cleaned the condenser coil. No major issues were found. The system was running at the completion of service.

Performed A/C tune-up on a Goodman heat pump system and checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. Verified compressor wiring is secure and washed the outdoor coil. I did find the outdoor condenser fan motor has a hot spot on it. The outdoor disconnect is broken as well and is bypassed. I informed the homeowner that we are causing stress on the main breaker by not having a disconnect box that works and the breaker could fail prematurely. The system is operational at completion of service.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I cleared the drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was clean and had been replaced by the customer. I cleaned the condenser coil. No major issues were found. The system was running at the completion of service.

Installed new extended supply plenum. Connected existing flex to new collars. Sealed all connections with mastic and hard cast. Installed 2 new supply registers in the master bedroom. Cleared condensation drain with CO2 and primed trap with water. Tested heating and cooling operation. Everything is working at this time.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I replaced the batteries in the thermostat for the homeowner and replaced the air filter with a client provided filter. I cleared the drain line and flow tested the drain line with two gallons of water. I also treated the drain line. The condenser coil was cleaned. No major issues were found. The system was running at the completion of service.

Performed AC cool check and checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with water. Air filters were replaced with client supplied filters. No major issues were found. The system was running at the completion of service.

Performed AC cool check and checked all electrical, mechanical, safety, and performance of the system. I cleared the drain line and flow tested the drain with two gallons of water. I also treated the drain line. Filters were replaced with client supplied filters. Condenser coil was cleaned. No major issues were found. The system was running at the completion of service.

On arrival, the homeowner informed me that every time her system turns on she hears a loud noise coming from the attic. I investigated and found that the blower wheel was broken at the center hub and was causing the whole system to vibrate. I spoke with the homeowner and presented options for repair. She chose to have the blower wheel replaced at this time. I replaced the blower wheel and verified the system is functioning correctly. I then performed an AC tune-up on a Carrier straight cool system and checked the electrical, mechanical, and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the furnace. Replaced the filters with client supplied filters and washed the outdoor coil. No other issues were found. The system is operational at this time.

Performed AC tune-up on a Trane 2 stage cooling system and checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line. Cleaned the exterior of the furnace and washed the outdoor coil. I found the water safety switch on the secondary pan had failed and was sending a constant voltage to the outdoor unit even when it was in the tripped position. I spoke with the homeowner and presented options for repair. He chose to have the safety switch replaced at this time. I replaced the water safety switch and cycled power at the thermostat. No other major issues were found. All UV lights, air purifier, and surge protector are working. The system is operational at this time.