Mountain City TX Heating & Air Conditioning Services

Diagnosed that the primary drain was clogged and that the overflow safety switch was stopping the condenser from running. Tried to clear drain and was unsuccessful. I re-piped the primary drain to the secondary drain for the time being and the system is up and running again.

Performed diagnostic and the system reported code 41 and 44 fault codes. After further testing, I found that the control board had failed. Gave Chris and Diana options and they chose to replace board and add surge protection for the air handler. Installed both the board and surge protection. Confirmed fan operation and system operation. System is operational upon departure.

Performed maintenance on the AC system. Found some issues with the duct work and informed the customer. System is operational upon departure

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no major issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed service diagnostic. Diagnostic found that the condensate drain had clogged and caused the safety switch to trip. Electronic safety switch would not reset. Options to replace electronic with a mechanical switch were presented to customer and customer chose to move forward with repair. Repair was completed and drain line cleared and treated. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed AC cool check on two systems. Checked electrical, mechanical, safety, and performance of the systems. No major issues were found. Drain lines cleared and treated. Condenser coils cleaned. Electrical disconnects confirmed in and on. Systems were running at the time of departure.

Trip 1 - Performed service diagnostic. Diagnostic found that blower motor was making a loud noise while running and was leaking grease from the motor. Blower door/panel was also missing and door switch was held closed with tape. Options for repair were presented to customer and they chose to replace blower motor and door panel. Electrical disconnect confirmed in and on. System was running at the time of departure. Will return to complete repairs and run maintenance check. Trip 2 - Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed service diagnostic. Diagnostic found that blower motor was making a loud noise while running and was leaking grease from the motor. Blower door/panel was also missing, door switch was held closed with tape. Options for repair where presented to customer. (Customer chose to replace blower motor and door panel.) Electrical disconnect confirmed in and on. System was running at the time of departure

Performed heating tuneup on American Standard heat pump system. During heating evaluation I found mildew forming at interior cabinet affecting indoor air. Also at outdoor unit I found wear & tear to starter and could interrupt operations. After presenting options to improve system client has decided to move forward. We will be replacing starter, adding start assist and surge protection to help prolong and protect the life of HVAC system. At indoor air handler we will be installing stage 3 of our BREATH EASY package to improve indoor air. Please see tuneup checklist for actual values. System is operational. Please reach out to client with ETA. System sterilizer components are available and under PO 1021 at ACES A/C supply house.

Walked client through repair over phone. System now operational. Client would like to join our maintenance program on Monday. Our office will reach out Monday to sign him up.

Performed diagnostic on an American Standard system and found indoor air movement system failure. I presented the client with options, but customer would like to contact prior homeowners first to discuss. Diagnostic collected and will be credited back toward next week’s repair if client chooses to move forward.

Performed diagnostic on an American Standard system and found indoor air movement system failure. I presented the client with options, but customer would like to contact prior homeowners first to discuss. Diagnostic collected and will be credited back toward next week’s repair if client chooses to move forward.

Performed further diagnostic on an American Standard air conditioner and found low-voltage short at control wiring for outdoor system. Presented customer with options and have chosen to move forward with replacement of control wiring to condenser and adding electrical conduit to protect it from the elements. Repairs and performance testing completed, and system is now operational.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Partial clog found in condensate drain line. Drain line was cleared and treated. No other major issue were found. Condenser coil cleaned. Electrical disconnect confirmed in and on. System set to 71° per customer. System was running at time of departure.

Performed diagnostic on an American Standard heat pump system and found supply buckets not sealed letting rock wool insulation into home. Also found a primary drain clog interfering with cooling cycle. All supply buckets have been sealed with mastic in attic where buckets and drywall meet. Primary drain was treated and cleared. Dirt and leaves have been vacuumed out of the condenser and the coils have been cleaned. Electrical and refrigerant charge verified, and system is now operational.

Air conditioning plumbing termination point is routed to utility washer box. Primary drain has been cleared and primed. System back up.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Condensate drain line was found to have a clog. Drain line clog was cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System set to 77° per customer. System was running at time of departure.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system with no issues found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System set to 74° per customer.

Performed cool check. Drain line was cleared and treated. Checked electrical, safety, mechanical, and performance of the system with no other issues found. Electrical disconnect confirmed in and on. System set to 74° per customer.

Performed cool check on AC system. Drain lines cleared and treated. System performance was in spec. Please see attached checklist for full tune-up details.

Performed cooling tune-up on an American Standard gas system. Please see attached checklist for full tune-up details.