San Marcos TX Heating & Air Conditioning Services

Ductwork Inspection and Repair: Performing a comprehensive ductwork inspection, I identified leaks and inefficiencies affecting HVAC performance. Through meticulous repair and sealing, I optimized airflow and energy efficiency, ensuring consistent comfort throughout the home.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Drain line was cleared and treated. The filter was replaced with a customer supplied filter. The blower wheel is clean. The condenser fan motor is in good condition and the condenser capacitor is within value. Contactor and disconnect are also in good condition. Refrigerant charge is within factory specifications. Condenser coil clean. No major issues were found, and the system was running at the time of departure.

Installed 3-ton gas system. Installed new T6 thermostat. Rebuilt and insulated the condensate drain line. Added SS2 and SS3 safety float switches. Installed new filter dryer, pressure tested with dry nitrogen and pulled a vacuum on copper line set. Replaced the disconnect and ran the low voltage in Seal-Tite. Replaced both supply and return plenums and sealed with a mastic airlock. Charged system to factory spec and performed a benchmark. System is working properly at time of departure.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. The drain line was cleared and treated. The air handler and evaporator coil are clean. The blower wheel is also clean. The wiring is tight and in good condition. System sterilizers are operational. Condenser coil clean. The contractor and capacitor for the condenser unit are in good condition. The condenser fan motor is also in good condition. Refrigerant charge is in range and the system is cooling to factory specifications. No major issues were found, and the system was running at the time of departure.

Performed cooling maintenance on one heat pump system. Checked all electrical, mechanical and performance of the system. Cleared and treated the drain line and washed the outdoor coil. Filter was replaced recently by the customer. No other major issues were found, and the system is operational at this time.

Performed cooling maintenance on a heat pump system. Checked all electrical, mechanical and performance of the system. Cleared and treated the drain line and washed the outdoor coil. Filters were replaced before my arrival. All UV lights and surge protectors are working. No major issues were found. System is operational at this time

Upon arrival, the homeowner stated that he noticed his thermostat will continue to run in cooling, 2-3 degrees below the set temperature. Performed the cooling maintenance. Checked all electrical, mechanical, safety and performance of the system. Cleared and treated the drain line and washed the outdoor coil. Customer supplied filter for replacement. I cycled the thermostat multiple times to try to recreate the issue, but the system ran fine each time. No major issues found.

Performed cooling maintenance on one straight cool system. Checked electrical, mechanical, safety and performance of the system. Cleared and treated the drain line and washed the outdoor coil. I found that the secondary drain pan (38x32) has a lot of rust on it. I informed the customer and presented options for repair. No other major issues were found. System is operation at this time.

Cool check on horizontal air handler heat pump system completed. Indoor blower wheel and coil are clean. Float switches tested. Drain line flushed multiple times. Had a conversation with the homeowner about potential issues with the drain and that they may need to have a plumber come out if they have issues with the drain this Summer. Heat pump coil cleaned. Capacitor within range and amp draws are good. I did find that the condenser fan motor is showing signs of overheating. Also, the contactor shows wear and pitting. No other major issues found

Arrived for a cool check on a horizontal furnace zone system. Replaced all six air filters. Cleared and treated the condensation drain line. Checked electrical upstairs as well as cleanliness of furnace. Proceeded outside to the condenser, cleaned coils and checked all electrical. The condenser fan motor is in good shape, but the outdoor capacitor is below manufacture specs. I recommended replacement of the capacitor, but the customer declined. Checked refrigerant levels and they are within spec. Both thermostats were cycled and the unit is cooling at this time.

Single system cooling check completed. The evaporator coil and condenser coil are clean. All electrical is within manufacture specs. Unable to check refrigerant levels due to ambient temperature. The contactor is old and showing its age. No other major issues found. The system is operating properly at this time.

I cleared the drain and rinse out the condenser coil. During my evaluation of the system, I discovered that for its age it’s in great shape. Both the indoor and outdoor motors are oil free and running properly. The contactor is nice and clean. The outdoor capacitor is running within spec. The refrigerant charge is proper for the machine. No recommendations were made at this time. System is in working order at completion of appointment.

I cleared the drain and rinse out the condenser coil. During my evaluation of the system, I discovered that for its age it’s in great shape. Both the indoor and outdoor motors are oil free and running properly. The contactor is nice and clean. The outdoor capacitor is running within spec. The refrigerant charge is proper for the machine. No recommendations were made at this time. System is in working order at completion of appointment.

I cleared the drain and rinse out the condenser coil. During my evaluation of the system, I discovered that for its age it’s in great shape. Both the indoor and outdoor motors are oil free and running properly. The contactor is nice and clean. The outdoor capacitor is running within spec. The refrigerant charge is proper for the machine. No recommendations were made at this time. System is in working order at completion of appointment.

I cleared the drain and rinse out the condenser coil. During my evaluation of the system, I discovered that for its age it’s in great shape. Both the indoor and outdoor motors are oil free and running properly. The contactor is nice and clean. The outdoor capacitor is running within spec. The refrigerant charge is proper for the machine. No recommendations were made at this time. System is in working order at completion of appointment.

Performed cooling maintenance on one heat pump system. Checked all electrical, mechanical and performance of the system. While performing maintenance, I found that the system is low on R410-A refrigerant, and the system does not have a water safety switch. The evaporator coil is very rusted, but I was unable to locate a leak at this time. I sent over the estimate for the repairs as well as an estimate for replacing the evaporator coil. No other major issues were found. System is running at this time.

We arrived at the home to find the system off. We immediately got to work and replaced the zone control board and the blower motor. I made new connections with the zone control board transformer using WAGO lever nuts. I made sure to install a standalone transformer for the zone control board. Chey replaced the upstairs thermostat and programmed it. I programmed the zone control board. We went outside and replaced the capacitor and then tested the system. The system came on and ran properly. System is in working order at completion of appointment.

We arrived at the home to find the system off. We immediately got to work and replaced the zone control board and the blower motor. I made new connections with the zone control board transformer using WAGO lever nuts. I made sure to install a standalone transformer for the zone control board. Chey replaced the upstairs thermostat and programmed it. I programmed the zone control board. We went outside and replaced the capacitor and then tested the system. The system came on and ran properly. System is in working order at completion of appointment.

We arrived at the home to find the system off. We immediately got to work and replaced the zone control board and the blower motor. I made new connections with the zone control board transformer using WAGO lever nuts. I made sure to install a standalone transformer for the zone control board. Chey replaced the upstairs thermostat and programmed it. I programmed the zone control board. We went outside and replaced the capacitor and then tested the system. The system came on and ran properly. System is in working order at completion of appointment.

We arrived at the home to find the system off. We immediately got to work and replaced the zone control board and the blower motor. I made new connections with the zone control board transformer using WAGO lever nuts. I made sure to install a standalone transformer for the zone control board. Chey replaced the upstairs thermostat and programmed it. I programmed the zone control board. We went outside and replaced the capacitor and then tested the system. The system came on and ran properly. System is in working order at completion of appointment.