San Marcos TX Heating & Air Conditioning Services

air conditioning installation of new 3-ton electric system. Installed new Honeywell T6 Pro thermostat. Rebuilt and insulated condensate drain line. Installed new filter dryer, pressure tested with dry nitrogen and pulled a vacuum on the copper line set. Moved condenser to the left side of the house and ran new copper, thermostat wire and new drain. Installed new disconnect for the condenser.

Performed heater maintenance. All heat strips and safeties are working. All components on the outdoor system are operational and refrigerant pressures are within range. Cleaned condenser.

Capacitor on the condenser unit was replaced. System was running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. All heat strips for the electric heat are operational. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System was running at the time of departure.

Installed new Carrier 2.5-ton gas system. Installed new Ecobee Pro. Rebuilt and insulated condensate drain line. Replaced secondary drain pan. Installed new filter dryer, pressure tested with dry nitrogen and pulled a vacuum on copper line set. Installed new disconnect at the condenser. Replaced both supply and return plenums and sealed with mastic airlock. Charged system to factory spec. System is working properly at time of departure.

Cleaned evaporator coil and indoor blower motor. Moved coil to allow better airflow. Added and installed new filter dryer. Pressure tested with dry nitrogen and pulled a vacuum on copper line set. Rebuilt and insulated new condensate drain, added a new transition and sealed it with mastic airlock. Lastly, converted system to propane.

Trip 1 - Diagnosed faulty indoor heat kit. Informed the homeowner and they chose to move forward with the repair. Ordered kit from Goodman and will scheduled follow up visit to complete repair. System currently heating with 10kw heating. Trip 2 - Returned to complete repair. Replaced indoor heat kit and verified system operation. All electric strips are working at this time. Spoke with homeowner about the age and condition of the indoor system (installed in ‘98) and told her to give us a call regarding any future issues. System operating at this time.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line was cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. System was running at the time of departure.

Installed new 4-ton Carrier Heat pump system. Installed new Ecobee Pro thermostat. Rebuilt and insulated condensate drain line. Added SS-2 and SS-3 safety float switches. Replaced secondary drain pan. Installed new filter dryer, pressure tested with dry nitrogen and pulled a vacuum on copper line set. Replaced both supply and return plenums and sealed with mastic airlock. Replaced master bedroom distribution box with metal wyes and made passive return go straight to the system return box. Charged system with line set calculations and checked full operation of the system. Moved the condenser over and put down a new pad.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Blower wheel was dirty and in need of cleaning. No other major issues were found. Drain line was cleared and treated. Condenser coil cleaned. Options for repair were presented to the customer and they declined at this time. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Condenser fan motor showed signs of overheating. Condenser capacitor was depleting. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. Options for repair were presented to the customer and they declined all repairs. System was running at the time of departure. Please see attached checklist for full tune-up details.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Drain line was cleared and treated. Air purifier, system sterilizers and surge protectors were on and operational. System was set to customers desired settings and the system was running at the time of departure.

Performed semiannual maintenance on one gas furnace system. Inspected all Performance, Mechanical and Safety Systems. Verified surge protection devices are online and functioning. Whole Home Air Purification system is actively functioning as designed. Everything is working at this time.

Removed all refrigerant and replaced the TXV and the in-line filter dryer. Pressure tested with dry nitrogen and pulled a deep vacuum on the system. Weighed new refrigerant back into the system and checked full operation of the system. The system is working properly at time of departure.

Trip 1 - Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Condenser fan motor showed signs of overheating. No other major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. See attached checklist for full tune-up details. Options for repair were presented to the customer and they chose to have the fan motor replaced with an OEM one. Will return to complete repair once part has arrived. Trip 2 - Replaced console fan motor and checked operation of the system. System is working at this time.

Replaced outdoor condenser fan motor. Verified system operation in both electrical and mechanical performance. Informed customer that the R-410A refrigerant was operating slightly below normal levels and to monitor future performance. System operating at this time.

Installed new extended plenum and rerouted ducts for better airflow. Supported flex duct and sealed all pressure points with air lock. System operating at this time.

Performed service diagnostic. Diagnostic found that the primary condensate drain line had a clog. Water had backed up to the safety switch. Safety switch was removed from the line and checked for function. The safety switch has also failed. Options for repair were presented to customer and they chose to have the safety switch replaced, have the drain cleared and treated and sign up for maintenance. Drain line was cleared and flow tested with water. Drain line was treated. Safety switch was replaced. System was running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Blower wheel is dusty/dirty. The inside of the furnace also has dust. No other major issues were found. Drain line was cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. System was running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. The system was running at the time of departure.