San Marcos TX Heating & Air Conditioning Services

Performed semiannual maintenance on one cooling system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Outdoor condenser refrigerant pressures within range and condenser wiped off and cleaned. Indoor system filter changed and drain treated. No major issues were found. System running at time of departure.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated drain line and washed outdoor condenser coil. Found the compressor wires were rubbing on the copper line. I insulated the copper and secured the wires. No other major issues were found. System is on and running at this time.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated drain line and washed the outdoor condenser coil. No major issues were found. System is on and running at this time.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. Blower motor capacitor is below value. No other major issues were found. Drain line cleared and treated. Condenser coil clean. Options for repair were presented to customer and they chose to have the capacitor replaced today. Repair was completed. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed AC cool check on two systems. Checked electrical, mechanical, safety, and performance of the systems. No major issues were found. Drain lines cleared and flow tested with water. Condenser coils clean. Electrical disconnects confirmed in and on. Systems were running at the time of departure.

Performed semiannual maintenance on one straight electric cooling system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. The surge protection device and air purifier are on and working per design at time of visit.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.

Installed 4 ton carrier straight electric system. Installed new Honeywell t6 thermostat. Rebuilt and insulated condensate drain line. Installed new filter dryer, pressure tested with dry nitrogen and pulled a vacuum on copper line set. Installed a new 14” system crossover duct. Charged system to factory spec. System is working properly at time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Drain lines cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed semiannual maintenance. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufactures specifications for operation.

Performed semiannual maintenance on one heat pump heating system. Inspected all Performance, Mechanical and Safety Systems. Did find the outdoor run capacitor and fan motor to be operating outside of the manufacture’s specifications for operation. Spoke with homeowner and we have decided to move forward with the repair of the outdoor system. Completed repairs and verified all systems were operating within the manufactures specifications for operation. Everything is working at this time.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. Drain line cleared and treated. Condenser coil cleaned. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed heat check on 4 systems. No major issues were found on the two Carrier systems. The two American Standard systems have mold/mildew in the air handler and on the wiring. The blower wheels and evaporator coils are also dirty. Both systems have condenser fan motors that have overheated but are still operational. The 2-ton American Standard heat pump for the upstairs also have a starter/contactor that is burnt. Drain lines cleared and treated on all systems. Condenser coils were also cleaned. Systems were running at the time of departure. Please see attached checklists for all tune-up details.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No major issues were found. System sterilizers are operational. Surge protection for the air handler and condenser are also operational. Drain line cleared and treated. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed heat check on two systems. Checked electrical, mechanical, safety, and performance of the systems. No major issues were found. Drain lines cleared and treated. Condenser coils cleaned. Electrical disconnects confirmed in and on. Systems were running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. No issues were found. Drain line cleared and treated. Condenser coil clean. Surge protection is operational. System sterilizers are operational. Electrical disconnect confirmed in and on. System was running at the time of departure.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Drain line cleared and treated. Condenser coil clean. Electrical disconnect confirmed in and on. Gas valve and manifold confirmed on. Surge protection for the condenser unit was operational.

Performed heater tune-up. Checked electrical, mechanical, safety, and performance of the system. High limit switch on the furnace was tripping and shutting down the system. Diagnostic found that the media filter is very dirty and the upstairs thermostat is bad. The upstairs damper was not being opened by the Nest thermostat. Blower fan was also set to the lowest setting on the fan motor. Fan was set to medium speed for heating. No other major issues were found with the system. Drain line cleared and treated. Options for repair were presented to the customer and they declined all repairs.

On arrival, I met with the homeowner. He said he had another HVAC company come out to inspect the indoor system. Said they noticed some oil residue on the indoor coil but did not leak check it. Used my electronic leak detector and found multiple leaks on the indoor coil. Contacted York and verified the manufacture’s credit warranty. Spoke with the Captain, and he said he wants to move forward with the repair but is having another company come out tomorrow and wants to meet with them first.