San Marcos TX Heating & Air Conditioning Services

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. No major issues were found. Cleared and treated drain line and washed the outdoor condenser coil. System Is on and running at this time.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated drain line and washed condenser coil. I found the condenser disconnect breaker sending inconsistent power and it would shut power to the unit randomly. No other major issues found. I presented my findings to the customer and he chose to have it replaced today. Disconnect replaced and I cycled the thermostat. Everything is on and running at this time.

Performed service diagnostic. Diagnostic found that the capacitor on the condenser unit has failed. Options for repair were presented to the customer and they chose to have the capacitor replaced today and sign up for our maintenance plan. Condenser capacitor was replaced. System was function checked. System was running at the time of departure.

On arrival the customer stated that there was a leak on their kitchen ceiling. After inspection I found that the copper line coming from the condensate pump was cracked and leaking water onto the ceiling. I presented customer with options to repair they chose to install a new condensate line. Replaced condensate pump drain line. Tested for any water leaks and the line is leak free. System is on and running at this time.

Blower wheel, air handler, evaporator coil and condenser coil were cleaned. System was charged with refrigerant (4.8 lbs). AC cool check was performed. No other major issues were found. Drain line cleared and treated. System was running at the time of departure.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated drain line and washed condenser coil. No major issues were found. Disconnect is in. System is running at this time.

On arrival, I found that the low voltage fuse tied into the zone panel had blown. Was able to track down fault to the barometric bypass damper, which would create extra amp draw on the older zone board. Completed repair and system is now operational.

Performed cooling maintenance on 3 heat pump systems. Checked electrical, mechanical and performance of all 3 systems. Cleared and treated drain lines and washed 3 condenser coils. Found small amounts of mold growth on systems labeled AH1 and AH3. Also the outdoor capacitor on the condenser labeled HP3 is undervalue. Presented customer with options to repair and they chose to have the capacitor replaced at this time. Repair completed, disconnects are in and systems are operational at this time.

Performed semiannual maintenance on 3 cooling systems. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Outdoor condenser refrigerant pressures on all three systems are within range, and all three condensing coils cleaned. Cleared indoor systems drain lines and filters changed. Noticed on Eastside unit #2 that the capacitor was low on value, and the inside blower wheel is dirty. No other major issues were found. Brought findings to the homeowner and he decided to move forward with repair and cleaning. Completed repairs and all systems operational.

Installed new 2-ton Payne heat pump system. Installed new Honeywell T6 thermostat. Rebuilt and insulated condensate drain line. Cleared and treated drain. Replaced secondary drain pan. Installed SS2 & SS3 float switches. Installed new filter dryer, pressure tested with dry nitrogen and pulled a vacuum on the copper line set. Removed old supply from the system and custom built a new supply plenum on site. Installed a new filter base with 16x20x1. Installed a new line set cover. Charged system to factory spec. System is working properly at time of departure.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Informed customer that the filters needed to be replaced as soon as possible. Cleared and treated drain line and washed condenser coil. No other major issues were found. System is on at this time.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated drain line and washed outdoor condenser coil. Informed the customer that the capacitor for the condenser unit is starting to decrease in value but is still within the allowable 6% range. No other major issues were found. Disconnect is in and on. Left system off at the thermostat per customer request.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated drain line. No major issues were found. I informed the customer that the filters are dirty and need to be replaced ASAP. Everything is on and running at this time.

Installed new outdoor condenser fan motor. Programmed motor to operate at manufacturers speed and rotation. Verified the outdoor system was operating per manufacturer guidelines for operation. Performed semiannual maintenance on one cooling system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation.

Performed cooling maintenance. Checked electrical, mechanical and performance of the system. Cleared and treated drain line and washed condenser coil. Found the high voltage wire in the furnace going to the door switch between two metals which could’ve potentially caused a rub out. I taped the wire and secured it to prevent future rub out. I also found the condenser fan motor showing signs of overheating. I presented the customer with options to replace the fan motor, but they declined at this time.

Performed service diagnostic. Diagnostic found that the condensate drain line was clogged. Water had backed up and tripped the safety switch. Options for repair were presented to customer and they chose to have the drain cleared and to sign up for maintenance. Drain line was cleared and flow tested with water. Drain line was treated. System was function checked and was running at the time of departure.

Performed semiannual maintenance on one cooling system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Outdoor condenser refrigerant pressures are within range. Indoor filter changed and drain line treated.

Repairs were completed. System was function checked and was running at the time of departure.

Performed semiannual maintenance on one cooling system. Inspected all Performance, Mechanical and Safety Systems. Verified everything was operating within the manufacture’s specifications for operation. Outdoor condenser refrigerant pressures within range. Also, condenser was cleaned and locking caps replaced. Indoor system drain line cleared and filters changed. No major issues were found. System running at time of departure.

AC maintenance visit. Performed full air conditioning maintenance checklist; Checked electrical, mechanical and performance of the system. I found the primary drain line to be broken. I fixed the primary drain line and took water out of the secondary drain pan. Cleared and treated the drain line. No other major issues were found. System is on and running at this time.