HVAC Service In Buda, TX

On arrival, I found that the emergency water safety switch was tripped due to a clogged drain line. I removed the clean out cap and water began to overflow the drain. I blew out the line and found all slime and sludge build up inside the line. I cleaned and cleared the primary condensate line and internal drain pan out to ensure proper drainage. Cycled power to system and verified operation. Everything is working at this time.

Cool check completed on a vertical heat pump system. Drain line was flushed and treated. Condenser coils were cleaned. During maintenance all mechanical and electrical was inspected and found within manufacture specs. System was cycled and cooling properly at time of departure.

Performed an A/C tune-up on an American Standard heat pump system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the furnace. Replaced Perfect Fit air filter for homeowner. No major issues were found, and the system is operational at this time.

Sealed all buckets to the drywall in the attic with mastic. Sealed all duct connections at the plenum, and the plenum itself. Removed and cleaned all supply registers and return grilles. Performed duct cleaning on all duct work in the house. Cleaned out the return chase under the unit. Cleared primary drain with CO2 and primed trap with water. Verified operation of AC. Everything is working at completion of service.

Performed all repairs on the ductless and central system. Replaced outdoor contactor and condenser fan motor. Removed blower housing, dissembled it, and cleaned it. Also completed an in-place coil cleaning. Performed cleaning on the mini-split system and verified operation. Cleared drain line and treated with water and chemical solution. Everything operating at this time.

Performed A/C tune-up on a Carrier heat pump system. Checked the electrical, mechanical and performance systems of the unit. Cleared, cleaned, flushed and treated the drain line. Cleaned the exterior of the air handler and washed the outdoor coil. I did find the indoor blower wheel is dirty. The outdoor fan motor has a hot spot. No other issues were found. System is operational at this time.

Performed an AC tune-up on a Carrier heat pump system. Checked the electrical, mechanical and performance systems of the unit. The filter was replaced recently by the homeowner and is still in clean condition. Cleared, cleaned, flushed and treated the drain line and cleaned the exterior of the air handler. Secured compressor wiring and washed the outdoor coil. No major issues were found. System is operational at this time.

Performed semiannual maintenance on two straight cool AC systems. Inspected all Performance, Mechanical and Safety systems. Tested and verified everything was operating within manufacture specifications for operation. Everything is working at this

Installed Carrier gas furnace. Installed Ecobee Pro thermostat. Installed new extended supply and new return plenum. Attached all flex and sealed with mastic air lock. Replaced secondary drain pan. Installed and tested SS2 and SS3 safety switches. Installed propane conversion kit. Rebuilt and insulated primary drain line. Installed new gas flex and hard piped the gas line into the system. Installed new B Vent. Cleared drain and verified operation. Tested system operation everything is operational at this time.

Performed AC cool check. Checked electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. Mold/mildew spots were found growing inside the air handler. The air filter was replaced with a customer supplied filter. I cleaned the condenser coil. No other major issues found.

Performed an AC cool check on two systems. Checked electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drains with water. I also treated the drain lines. The air filter had been recently replaced by the homeowner and was still in clean condition. I cleaned the condenser coils. No major issues were found. Both systems were running at the completion of service.

Performed semiannual maintenance on one heat pump cooling system. Inspected all Performance, Mechanical and Safety systems. Tested and verified everything was operating within manufacture specifications for operation. Everything is working at this time.

Performed the AC cool check. Checked electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filters were replaced with customer supplied filters. System sterilizers and surge protectors are operational. I also cleaned the condenser coil. No major issues were found. The system was running at the completion of service.

Performed the AC cool check. Checked electrical, mechanical, safety, and performance the system. The drain line could not be effectively cleared due to the way it is currently piped. I flow tested the drain with water and treated the drain line. The filter had been recently replaced by the customer and was still in clean condition. The capacitor for the condenser unit was below value. Options for repair were presented to the customer, and he chose to have the capacitor replaced today. I replaced the capacitor on the condenser unit and cleaned the condenser coil. I function tested the system and the system was running at the completion of service.

Performed semiannual maintenance on one heat pump cooling system. Inspected all Performance, Mechanical and Safety systems. Tested and verified everything was operating within manufacture specifications for operation. Everything is working at this time

Performed AC cool check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter had been recently replaced by the homeowner. I cleaned the condenser coil. No major issues were found. The system was running at the completion of service.

Performed AC cool check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. I cleaned the condenser coil. No major issues were found. The system was running at the completion of service.

Performed semiannual maintenance on one straight cool AC system. Inspected all performance, mechanical and safety systems. Tested and verified everything was operating within manufacturer specifications for operation. Changed out one 20x25x1 air filter. Cleaned and washed the outdoor condenser coils and treated the primary condensate drain systems. No major issues were found. Everything is working at this time.

Performed AC cool check. Checked the electrical, mechanical, safety, and performance of the system. I cleared the condensation drain line and flow tested the drain with two gallons of water. I also treated the drain line. The air filter was replaced with a client supplied filter. I found that the condenser unit was full of dirt and leaves. I cleaned the condenser unit. I also found that the capacitor on the condenser unit was below value and the condenser fan motor was leaking lubricant. Options for repair were presented to the homeowner. They chose to replace the capacitor and condenser fan motor. They also signed up for the gold maintenance plan. I replaced the condenser capacitor and the condenser fan motor. I then function tested the system. The system was running at the completion of service.

On arrival, I spoke with homeowner who mentioned that over the weekend the system would run for a few minutes then shut off and then come back on a few minutes later and just repeat the cycle. I turned the thermostat on and checked over operation. During the run cycle, the system tripped off. I went back up into the attic and found that the water safety switch had tripped at the primary drain line. I was able to determine that the location of the clog was near the high line branch connection at the tailpiece of bathroom sink. I spoke to the homeowner and recommended we clean and clear all the gunk from the primary condensate line to return system back to full operation. He chose to have the drain cleared today. I flushed and treated the primary drain line, verified proper slope of drain for condensate removal and cycled high voltage power to system. Tested all systems and verified operation. Everything is working at this time.