HVAC Service In Buda, TX

I performed a heating tune-up on the system. I made sure to rinse out the outdoor unit. During my inspection, I discovered that the capacitor was weak and out of spec. Everything else on the system looked good and all of the components were operating properly. I brought my findings to the attention of the homeowner. He elected to renew his maintenance plan and also have the capacitor replaced today. I replaced the capacitor with a Turbo capacitor and tested the system. Everything ran properly. System is in working order at completion of appointment. See attached checklist for full tune-up details.

I performed a heating tune-up on the system. I made sure to rinse out the outdoor unit. During my inspection, I discovered that the capacitor was weak and out of spec. Everything else on the system looked good and all of the components were operating properly. I brought my findings to the attention of the homeowner. He elected to renew his maintenance plan and also have the capacitor replaced today. I replaced the capacitor with a Turbo capacitor and tested the system. Everything ran properly. System is in working order at completion of appointment. See attached checklist for full tune-up details.

I performed a heating tune-up on the system. I made sure to rinse out the outdoor unit. During my inspection, I discovered that the capacitor was weak and out of spec. Everything else on the system looked good and all of the components were operating properly. I brought my findings to the attention of the homeowner. He elected to renew his maintenance plan and also have the capacitor replaced today. I replaced the capacitor with a Turbo capacitor and tested the system. Everything ran properly. System is in working order at completion of appointment. See attached checklist for full tune-up details.

I performed a heating tune-up on the system. I made sure to rinse out the outdoor unit. During my inspection, I discovered that the capacitor was weak and out of spec. Everything else on the system looked good and all of the components were operating properly. I brought my findings to the attention of the homeowner. He elected to renew his maintenance plan and also have the capacitor replaced today. I replaced the capacitor with a Turbo capacitor and tested the system. Everything ran properly. System is in working order at completion of appointment. See attached checklist for full tune-up details.

Efficient Furnace Repair: Called to troubleshoot a heating issue with an unstable pilot light, a comprehensive assessment revealed a malfunctioning thermocouple. Prompt replacement of the faulty thermocouple ensured continual stability and uninterrupted operation of the pilot light, addressing immediate concerns while maintaining overall safety and efficiency in the heating system.

HVAC Repair: Responding to a client's urgent request, our skilled technicians swiftly addressed an issue with their malfunctioning heat pump. A comprehensive inspection revealed a malfunctioning compressor, causing disruptions in the system's heating and cooling capabilities. With precision and expertise, our team replaced the faulty compressor, restoring the heat pump to its optimal working condition. This meticulous intervention not only guaranteed efficient and dependable heating and cooling but also secured the client's year-round comfort, emphasizing our commitment to delivering top-tier HVAC solutions.

Whole-Home Generator Installation: Understanding the critical need for a reliable power backup, our team collaborated with a homeowner to assess their specific requirements for a whole-home generator system. After a detailed discussion and selection process, we scheduled the installation. Our skilled technicians seamlessly integrated the generator into the home's electrical system, ensuring it was strategically placed for optimal performance. Rigorous testing followed to confirm its seamless operation during power outages, providing the homeowner with a robust and uninterrupted power supply for their entire residence.

Installed new Carrier vertical heat pump system. Hung unit from ceiling with a plywood base. Installed new return and supply plenums and ran flex duct to add on. Also installed 10” flex rerun duct into existing rerun. Reinstalled air purification system and sealed all pressure points with air lock. Added filter line dryer and pressure tested system for extensive leak check. Pulled vacuum and installed Ecobee Pro thermidistat.

Installed 2-ton Carrier heat pump system. Installed Ecobee Pro thermostat. Installed new supply plenum and sealed all connections with mastic air lock. Installed Aprilaire 310 filter cabinet. Rebuilt and insulated condensate drain line and installed SS2 safety float switch. Pressure tested line set with nitrogen and pulled a vacuum on the line set. Reinsulated the suction line and ran low voltage in 1/2” Seal-Tite. Replaced disconnect at outdoor unit. Verified system operation and charged system to manufacturers specifications.

Performed heating maintenance on a heat pump system and a mini split system. Checked all electrical, mechanical and performance of the systems. I cleared and treated the drain line and washed the outdoor coils. Customer did not have a filter for replacement at this time but said he would buy one and replace it as soon as possible. I also found some mildew growth in the mini split system and recommended having it cleaned. Customer asked me to email an estimate for the cleaning. No other major issues were found and the system is operational at this time.

Performed heating maintenance on one furnace system. Checked all electrical, mechanical and performance of the system. I cleared and treated the drain line. Filter had been replaced by the customer prior to my arrival. No major issues were found, and the system is operational at this time.

Performed semiannual maintenance on one comfort heating gas furnace system. Inspected all Performance, Mechanical and Safety Systems. I did speak with the homeowner and she stated that she noticed her gas bill was higher than normal. I let her know that during the maintenance I would pay extra attention to the fuel delivery system of the furnace. During the maintenance I found that the gas pressure at the furnace valve was running higher than required. I brought the fuel pressure down to the manufacturer’s specifications for operation. I tested both low & high heating stages to ensure adequate heat is being provided from the furnace throughout the home. Verified everything was operating within manufacture’s specifications for operation.

Performed semiannual maintenance on two heat pump heating systems. Inspected all Performance, Mechanical and Safety Systems. I applied an antioxidant coating to the aluminum wire at the disconnects of the outdoor unit. I also verified that all lugs were tightened to spec to help prevent the wire from overheating. I did note on the downstairs outdoor heat pump that the condenser fan motor is beginning to reach the amp rating. No other major issues found, and everything is working at this time.

Performed heat check on two systems. Checked electrical, mechanical, safety, and performance of the system. All heat strips on both systems activated. One filter had been changed by the homeowner prior to arrival, and the other filter was dirty, but the homeowner did not have a replacement. No major issues were found and the system was running at time of departure.

Replaced Goodman air handler. Replaced bullhead plenum and reinstalled zoning equipment. Replaced secondary drain pan and rebuilt and insulated condensate drain line. Replaced disconnect and ran new wire to the air handler. Sealed all connections with mastic air lock. Pressure tested line set with nitrogen and pulled a vacuum on the line set. Cleared drain and verified operation. Charged system back to manufacturer’s specifications. Everything is operational at this time.

Removed the three triangle satellite plenums and installed sheet metal wyes. Enlarged the two ducts running to the back bedrooms. Replaced the I-boxes and grilles to those two rooms. Sealed all the I-boxes to the drywall.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and the flame sensor was cleaned. The filter was changed with customer supplied filter. Noticed some buildup on the indoor blower wheel and the outside condenser fan motor is showing early signs of overheating. Brought this to the homeowner’s attention and she declined repairs today. No other major issues were found and system running at time of departure. Gas valve confirmed on.

Replaced the furnace heat exchanger. Replaced the 14” flex duct running upstairs with rigid ducting. Increased the baby room flex run and I-box. Cleared the condensation drain line. Tested the system for proper operation.

Performed heat check. Checked electrical, mechanical, safety, and performance of the system. Flame ignition achieved and flame sensor cleaned. Filter in clean condition. Noticed some buildup on the blower motor wheel and brought this to the customer’s attention. She decided to revisit a blower wheel cleaning when we come back for her Spring checkup. No other major issues were found and system running at time of departure. Gas valves confirmed on.

Performed heating maintenance on two furnace systems. Checked all electrical, mechanical and performance of the systems. Filters are dirty, but the customer did not have any filters for replacement at this time. The blower motor capacitor is under value for the upstairs system. No other major issues found. See attached checklists for full tune-up details. I presented options for repair, and they chose to have the capacitor replaced at this time. I replaced the blower capacitor and cycled the thermostat. Both systems are on at this time.